Freya Yang
+86 18318948097
+852 62667476
5.5 Inch MIPI TFT LCD Panel for Handheld Terminals
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS0550HDI-04MT
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Control Type
Operating Environment
Designed For
5.5 Inch MIPI TFT LCD Panel for Handheld Terminals
A slim portrait TFT panel for compact embedded interfaces, with capacitive touch available by configuration.
The 5.5 Inch MIPI TFT LCD Panel is a portrait 720×1280 component for handheld terminals, compact navigation interfaces, portable service equipment, and embedded control devices. Its 68.04 × 120.96 mm active area supports vertically arranged menus, status information, maps, readings, instructions, and interactive controls within a narrow front-panel footprint.
Capacitive touch is optional and must be specified in the ordered assembly rather than assumed from the product photographs.
Key Specifications at a Glance
| Parameter | Value |
|---|---|
| Display size | 5.5 inch |
| Native resolution | 720 × 1280 pixels |
| Orientation | Portrait |
| Display technology | a-Si TFT LCD |
| Active area | 68.04 × 120.96 mm |
| Panel outline | 71.14 × 130.19 × 1.70 mm |
| Interface | MIPI |
| Driver IC | OTM1287A |
| Viewing configuration | Full-view wording |
| Touch configuration | Optional capacitive touch |
Final approval must define the MIPI lane arrangement, complete FPC assignment, voltage requirements, timing, touch configuration, cover structure, and approved mechanical drawing.
Portrait Display Design
The 720×1280 format provides a tall canvas for interfaces that organize information vertically. It can accommodate a primary image or data field with menus, navigation buttons, notifications, and status elements arranged above, below, or beside the main content.
Native-resolution content
The host should generate the native 720×1280 pixel format. Scaling from unrelated resolutions can reduce text clarity and increase controller or graphics-processing requirements.
Font size, icon dimensions, line weight, and information density should be checked at the physical 5.5-inch size rather than evaluated only on a desktop design canvas.
Active-area planning
The 68.04 × 120.96 mm active area establishes the visible image region. The cover opening, bezel, touch border, and enclosure window should be designed from the approved mechanical drawing rather than the diagonal size alone.
Full-view qualification
The panel is described as a full-view configuration, but numerical viewing-angle values are not specified. Mounting angle, enclosure depth, cover material, and final user position should therefore be tested with production-representative samples.
MIPI Host Compatibility
The MIPI connection is the primary display interface, but the interface name alone does not establish compatibility with a host processor, development board, cable, or connector.
Lane and timing requirements
Before the host board is released, confirm:
- MIPI lane count
- Lane mapping
- Clock arrangement
- Native 720×1280 timing
- Required data format
- Display and logic voltage levels
- Reset and enable signals
- Complete FPC assignment
- FPC pitch and contact orientation
- Backlight-control requirements
A MIPI connector with the same pin count does not guarantee matching signal order or electrical requirements.
Non-MIPI video inputs
HDMI, LVDS, eDP, DisplayPort, parallel RGB, and USB video cannot drive the raw panel directly. These sources require a controller or bridge capable of producing the specified MIPI display signals.
Host-controller selection
A host processor must support the panel’s lane configuration, timing, data format, and power requirements. Generic compatibility claims should not replace a documented pin-by-pin and timing review.
Optional Capacitive-Touch Assembly
The base product is a TFT LCD panel with capacitive touch available as an option. The ordered part should state whether it includes only the LCD or a complete LCD-plus-touch assembly.
Touch configuration
For a touch-enabled version, confirm:
- Touch-controller identity
- Touch communication interface
- Supply and logic levels
- Interrupt and reset signals
- Touch FPC assignment
- FPC pitch and contact side
- Required simultaneous touch-point count
- Cover thickness and border design
- Adhesive or bonding structure
- Firmware and host-driver requirements
No universal multi-touch count is confirmed for every configuration.
Cover and enclosure effects
A capacitive-touch cover changes the total outline, thickness, visible opening, border, cable routing, and enclosure fit. Tooling should follow the drawing for the complete ordered assembly rather than the bare-panel outline.
LCD-only versus touch version
The LCD-only version and the touch-enabled version may share the same visible display area while differing mechanically and electrically. Samples should match the final production configuration.
OTM1287A Integration Boundary
OTM1287A is identified as the panel’s display IC. This helps define the product configuration but does not prove a universal pin assignment, initialization process, voltage design, MIPI timing, or software-library match.
Two panels using the same IC can still differ in:
- FPC pin sequence
- Lane assignment
- Native timing
- Supply requirements
- Reset or enable behavior
- Panel configuration
- Backlight circuit
- Mechanical layout
The complete panel specification remains controlling.
Mechanical Integration of the 5.5 Inch MIPI TFT LCD Panel
The bare-panel outline measures 71.14 × 130.19 × 1.70 mm, providing a slim structure for handheld and space-constrained devices.
Enclosure fit
The housing must account for the complete outer dimensions, active-area position, FPC exit, connector location, rear-component clearance, and assembly tolerances.
The 1.70 mm value applies to the specified panel outline and should not automatically be used as the thickness of a touch-cover assembly.
FPC routing
Allow sufficient space for:
- Connector insertion
- Locking mechanism access
- Recommended bend radius
- Cable movement during assembly
- Rear-component clearance
- Service and replacement access
Sharp folds, fastener pressure, and adhesive contact with the FPC component region should be avoided.
Front protection
No cover hardness, impact rating, waterproofing, optical bonding, or surface-treatment grade is confirmed. Protective requirements should be defined for the final device environment.
Selection and Application Boundaries
The 5.5 Inch MIPI TFT LCD Panel is suited to products that need a compact portrait display and a host platform capable of generating the required MIPI signals.
Appropriate project directions include:
- Handheld service terminals
- Compact navigation interfaces
- Portable test and service equipment
- Embedded configuration devices
- Smart control panels
- Equipment status terminals
- Portable data-entry devices
- Portrait operator interfaces
Outdoor, medical, vehicle, payment-related, and safety-critical equipment requires separate environmental, electrical, optical, and regulatory review.
Customization and Procurement Scope
Project evaluation may cover:
- MIPI lane and pin definition
- FPC shape and orientation
- Capacitive-touch integration
- Touch-controller selection
- Cover dimensions
- Brightness targets
- Mechanical adaptation
- Packaging
- Controller-board matching
Custom configurations are reviewed case by case, subject to tooling requirements, material availability, and the requested specification. Sample and production quantities are confirmed separately.
Procurement and Sample Approval Checklist
Confirm:
- Native 720×1280 timing
- MIPI lane count and mapping
- Complete FPC pin assignment
- Display and logic voltage levels
- Reset and enable requirements
- FPC pitch, contact side, and orientation
- LCD-only or touch-enabled configuration
- Touch controller and communication interface
- Required touch-point count
- Cover and bonding structure
- Active-area alignment
- 71.14 × 130.19 × 1.70 mm bare-panel fit
- Brightness target
- Operating environment
- Sample quantity
- Estimated annual demand
- Production timing
- Controller or bridge-board requirement
FAQ
About 5.5 Inch MIPI TFT LCD Panel
What MOQ, lead time, and sample policy do you support for evaluation and pilot runs?
For MOQ, lead time, and sample policy, please contact our sales team directly. We typically support evaluation samples for qualified projects, and MOQ and lead time depend on the specific configuration and current production schedule. We recommend submitting a formal inquiry with your volume and timeline to receive a tailored quotation.
Can you integrate a touch controller and provide a fully assembled display module?
Yes, the product includes a capacitive touch panel (CTP) as an optional assembly. The touch controller integration must be specified in the ordered configuration; it is not assumed from product photos. Please confirm with our engineering team the exact touch controller model and interface compatibility for your application.
Can you customize the mechanical dimensions and mounting holes of a standard LCD panel to fit our specific enclosure design?
Custom mechanical dimensions and mounting holes are possible for standard LCD panels, but this requires a custom tooling investment and minimum order quantity. Please provide your enclosure drawings and required outline dimensions to our engineering team for feasibility assessment and cost estimation.
Do you offer displays with wide viewing angles (e.g., 85/85/85/85)?
Yes, this panel supports all viewing angles, which typically indicates wide viewing angle technology such as IPS or similar. The product information states 'All viewing angles', so it meets the 85/85/85/85 requirement commonly used in industrial displays. For exact contrast ratio and viewing angle data, please request the full datasheet.
What are the warranty terms and after-sales service for your display products?
For exact warranty duration, return policy, and after-sales service details for the HS0550HDI-04+ MTP0550GF-02, please confirm with the supplier directly.
What interface options are available (e.g., LVDS, eDP, MIPI) for your panels?
This 5.5 Inch MIPI TFT LCD Panel uses a MIPI interface, as indicated by the model number and specifications. MIPI is a common high-speed serial interface for portable displays, offering reduced pin count and EMI. For other interface variants or custom configurations, please contact the supplier to confirm availability.
What are the brightness levels available for industrial displays, and can you customize beyond 1500 nits?
The brightness for this panel is For industrial displays, we can offer various brightness levels, including high-brightness options above 1500 nits, but this requires custom configuration. Please request the datasheet or confirm with engineering the achievable brightness for your specific application.
Can you provide a custom LCD panel with specific dimensions and a round shape?
Custom LCD panels with specific dimensions and round shapes are possible but require a custom design and tooling process. This involves significant engineering effort and minimum order quantities. Please provide your exact dimensional and shape requirements to our engineering team for a feasibility study and cost estimate.
What touch screen technologies do you support (e.g., capacitive, resistive, in-cell)?
This panel supports capacitive touch (CTP) as an optional configuration. Capacitive touch is preferred for handheld terminals due to its multi-touch capability, durability, and responsiveness. For other touch technologies or custom requirements, please confirm with the supplier.
What are the packaging options for shipping displays to prevent damage during transit?
Packaging options for shipping displays include anti-static bags, foam inserts, and custom-designed cartons to prevent damage during transit. For bulk orders, we use reinforced boxes with cushioning materials. Please specify your packaging requirements in the purchase order, and we will ensure safe delivery.
Freya Yang
+86 18318948097
