~
~
~
~
~
~
MB156AN01-3 Single Lane eDP WXGA Screen 15.6 Inch Laptop HKC
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
hkc
MB156AN01-3
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Input Voltage (V)
Designed For
Product Details
Product Overview
MB156AN01-3 Single Lane eDP WXGA Screen is a 15.6-inch HKC a-Si TFT-LCD LCM for laptop integration and exact-model replacement work. It uses a native 1366(RGB)×768 WXGA raster in a 16:9 format, TN normally-white transmissive operation, 60 Hz refresh and a 220 cd/m² typical luminance. The display area is 344.232 × 193.536 mm inside a 350.66 × 216.15 × 3.2 mm module outline. Its panel-side signal path is single-lane eDP 1.2 on a 30-pin 0.5 mm connector with 3.3 V typical input, and the module is supplied without a touch screen.
This configuration is an LCM with an integrated WLED light source and LED driver, unlike a bare CELL that requires a separately engineered backlight. The 15K-hour backlight-life reference is useful for component qualification but is not a guarantee of finished-notebook service life. Replacement decisions should therefore start with the exact MB156AN01-3 identity, then confirm image timing, cable pinout, connector position, panel outline, mounting method and platform power behavior.
Three Core Buyer Value Propositions
1. Single-lane eDP narrows the electrical replacement class
The native interface is defined as one-lane eDP 1.2 with a 30-pin 0.5 mm connector. That is more useful to a repair or integration team than the generic phrase “30-pin laptop panel” because it identifies the lane architecture and standard generation that the host must support. It still does not prove drop-in compatibility: pin assignment, connector orientation, cable reach, timing and power sequence remain exact-model checks.
2. Confirmed 15.6-inch WXGA mechanics support early fit screening
The 350.66 × 216.15 × 3.2 mm outline and 344.232 × 193.536 mm active area give buyers concrete dimensions for lid-cavity and bezel-window comparison. This can eliminate obviously wrong alternatives before sample purchase. The boundary is the mounting implementation: a matching outer rectangle does not prove that brackets, adhesive locations or connector placement are identical, so the current drawing or controlled sample should remain the final mechanical reference.
3. Integrated WLED driver keeps the panel-side illumination architecture self-contained
MB156AN01-3 includes a WLED source with an LED driver and a 15K-hour reference. For a qualified notebook platform, that means the display module carries its own backlight subsystem rather than requiring an external backlight assembly. The system still controls power and brightness behavior, and the 15K reference should not be translated into guaranteed notebook lifetime, warranty duration or long-term supply availability.
Key Specifications at a Glance
| Parameter | Confirmed value |
|---|---|
| Manufacturer / model | HKC MB156AN01-3 |
| Display size | 15.6 inch |
| Panel type | a-Si TFT-LCD, LCM |
| Native resolution | 1366(RGB)×768 WXGA, 16:9 |
| Active area | 344.232 × 193.536 mm |
| Outline | 350.66 × 216.15 × 3.2 mm |
| Brightness | 220 cd/m² typical |
| Contrast ratio | 500:1 typical |
| Viewing-angle values | 45/45/15/35 typical at CR≥10 |
| View direction | 6 o'clock |
| Response time | 12 ms typical G-to-G |
| Colors | 16.2M, 45% NTSC |
| Surface | Hard coating 3H |
| Refresh rate | 60 Hz |
| Native interface | eDP 1.2, 1 lane, 30-pin 0.5 mm connector |
| Panel input | 3.3 V typical |
| Backlight | WLED, 15K hrs, with LED driver |
| Touch | Without touch screen |
| Operating / storage | 0 to 50 °C / -20 to 60 °C |
How should a one-lane eDP 1.2 laptop panel be qualified?
VESA defines Embedded DisplayPort as an interface intended for embedded displays such as notebook panels. Its eDP overview explains that the link carries video from system graphics hardware to the internal display panel. MB156AN01-3 uses an earlier eDP 1.2 implementation with one lane, so the exact panel timing and electrical details remain specific to this product rather than being implied by the broader standard.
For MB156AN01-3 Single Lane eDP WXGA Screen, verify the production cable against the 30-pin 0.5 mm connector, including pin assignment, connector side, insertion orientation and cable bend path. Check native 1366×768 startup, sleep/resume, brightness control and repeated power cycling on the target motherboard. An eDP-capable notebook is only a starting condition; it does not prove that its cable or firmware is compatible with this exact LCM.
What do the TN viewing values mean for notebook placement?
The panel is specified as TN, normally white and transmissive, with a preferred view direction at 6 o'clock. The viewing-angle values are 45/45/15/35 typical at CR≥10 rather than the symmetric wide-angle values common to many IPS-class panels. That makes hinge angle and the normal user viewing position relevant when evaluating the module in a finished notebook. It should not be described as wide-view IPS or equivalent without evidence.
The 500:1 typical contrast ratio and 16.2M / 45% NTSC color wording also establish a mainstream optical baseline rather than a wide-gamut creator-display claim. If a project requires a specific color-space coverage, calibrated white point or wider off-axis performance, qualify a panel whose exact evidence supports those requirements. Do not upgrade MB156AN01-3 based on the capabilities of another HKC laptop product.
Is 220 cd/m² enough for the target notebook?
The documented luminance specification is 220 cd/m² typical. That is an exact panel fact, but it is not evidence of sunlight readability or high-brightness classification. Whether it is suitable depends on the notebook’s intended indoor environment, front-surface reflections, brightness-control range and user expectations. A buyer replacing an existing panel should compare the original panel requirement rather than assuming that any 15.6-inch WXGA screen will have the same luminance.
HKC’s laptop display portfolio shows that the manufacturer serves multiple notebook segments across 11.6–16 inches. That portfolio context supports the laptop application, but its higher-gamut or higher-refresh examples are not extra specifications for this exact model. MB156AN01-3 should remain bounded to its confirmed 220 cd/m², 60 Hz, 45% NTSC and TN data.
Mechanical and surface checks for replacement work
The 3.2 mm module thickness is part of a slim, flat-PCBA construction. That helps define lid depth and rear-clearance requirements, while the 350.66 × 216.15 mm outline defines the overall rectangle. The active area is smaller at 344.232 × 193.536 mm, so bezel-window alignment should be checked separately from the outer dimensions. Connector location and mounting details still need the current drawing or a sample.
The front treatment is listed as hard coating 3H, not as an antiglare haze specification. Do not add “matte” or a haze percentage unless the exact-model evidence supports it. For service replacement, compare the original screen’s surface appearance if the notebook design or customer expectation depends on reflections. Mechanical fit, surface behavior and cable routing should be verified together before approving a substitute.
Backlight, temperature and service-life boundaries
The integrated WLED subsystem has a 15K-hour life reference and an LED driver. That field describes the component backlight under its stated basis; it does not establish the notebook’s warranty life, battery runtime or expected supply duration. Brightness usage, thermal conditions and duty cycle influence the completed system. If service inventory is being planned, current stock should be treated separately from any future availability commitment.
The panel operates from 0 to 50 °C and stores from -20 to 60 °C. These are normal component limits for qualification and should be checked against the hot spots and cold-start conditions of the target notebook. They do not make the product an industrial-wide-temperature, automotive or rugged display. No vibration or formal environmental qualification is documented for this model.
Application fit: laptop integration and exact-model replacement
MB156AN01-3 Single Lane eDP WXGA Screen is documented for laptop use, and same-model public listings position it in notebook-screen sourcing. The strongest application is therefore integration into a notebook platform designed around this exact 15.6-inch WXGA LCM, or an exact-model replacement project where the installed label is MB156AN01-3. For any alternate-model replacement, compare electrical and mechanical details rather than relying on diagonal size, resolution or a 30-pin connector alone.
The module is without touch. A notebook assembly that includes a separate digitizer, cover glass or touch controller should treat those parts as distinct system elements. This page does not claim exact fit to a particular laptop SKU because no such system-level match is documented. Procurement teams should use the original panel label, service BOM, cable part number and physical sample where available.
Receiving inspection should also preserve traceability between the carton label, panel label and approved sample. Record the exact suffix, connector orientation and visible surface condition before assembly. If a shipment contains a different revision or substitute model, quarantine it for engineering review rather than assuming the electrical path is unchanged. This control is especially useful for service programs where multiple 15.6-inch WXGA panels can look similar before the lid is opened.
Procurement and incoming-quality checklist
- Confirm the exact HKC MB156AN01-3 model suffix on the incoming label.
- Match 1366×768 WXGA timing, 16:9 geometry and 60 Hz operation.
- Verify one-lane eDP 1.2, the 30-pin 0.5 mm connector, pin assignment and cable orientation.
- Check the 350.66 × 216.15 × 3.2 mm outline against the lid, bezel and mounting method.
- Confirm 220 cd/m² typical luminance and the TN 6-o'clock viewing direction against the project requirement.
- Verify the integrated WLED driver and brightness-control behavior on the target motherboard.
- Confirm that a non-touch module is correct for the assembly.
- Run image, color, pixel, backlight-uniformity, sleep/wake and thermal checks on the approved sample.
- Confirm current revision, quantity and change status at ordering time; do not infer a long-term supply commitment from a current stock listing.
When sourcing MB156AN01-3 Single Lane eDP WXGA Screen, submit the original panel label, laptop or platform model, cable identification, connector photos or drawing, required quantity and any critical optical or mechanical limits. Exact-model evidence should control the decision, with any proposed alternate treated as a new qualification rather than an automatic substitute.
Recommended: Same Size
(15.6")
Applications & Value of LCD Panel
- Fast sourcing with in-stock panels & cross-reference alternatives
- Stable supply chain with long-term availability
- Engineering-level support from panel to integration
- Custom solutions: cable, touch & optical bonding
- Strict quality control with IQC / OQC / aging test
- Full traceability system for quality assurance
- Complete technical documentation & drawings
- Compliance support: RoHS & certification files




