Freya Yang
+86 18318948097
+852 62667476
11.6 Inch eDP Capacitive LCD Module for Embedded HMI
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS116WFO5A-V1
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Touch Interface
Control Type
Weight (g)
Maximum Power
Protective Glass Specification
Operating Environment
Designed For
11.6 Inch eDP Capacitive LCD Module for Embedded HMI
A 1366 × 768 anti-glare touch display with a 30-pin eDP connection for qualified indoor control-system integration.
Product Summary
The 11.6 Inch eDP Capacitive LCD Module combines a 1366 × 768 TFT display, capacitive touch structure, and 30-pin eDP connection in a compact widescreen format. It is designed for embedded HMI terminals, equipment consoles, indoor kiosks, and control products that require direct on-screen interaction without moving to a large-format panel.
The module uses an a-Si TFT active matrix, a normally black transmissive display mode, and an anti-glare hard-coated surface. Its 220 cd/m² luminance is appropriate for indoor or controlled-light equipment rather than direct-sunlight installations.
The display connection, touch connection, cable definition, power requirements, and adapter-board configuration must be qualified as one complete system before production release.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Display size | 11.6 inches |
| Resolution | 1366 × 768 pixels |
| Display interface | eDP |
| Connector | 30-pin |
| Touch configuration | Capacitive |
| Brightness | 220 cd/m² |
| Color gamut | 72% NTSC |
| Display colors | 16,777,216 colors |
| Active area | 256.13 × 144.00 mm |
| Module size | 267.92 × 157.27 × 2.8 mm typical |
| Pixel pitch | 0.1875 × 0.1875 mm |
| Surface | Hard coating, anti-glare |
| Display mode | Normally black, transmissive |
| Weight | 205 g typical |
Display Performance for Indoor HMI Equipment
1366 × 768 Interface Layouts
The 1366 × 768 resolution supports widescreen menus, equipment status pages, control icons, trend windows, and operating prompts. It provides more horizontal workspace than a 1024 × 600 panel while avoiding the processing and bandwidth requirements of a Full HD display.
This resolution is suitable for systems that need a clear graphical interface but do not require dense photographic or high-resolution diagnostic imaging. The final UI should still be tested at the intended viewing distance, font size, and touch-target dimensions.
Anti-Glare Surface and 220 cd/m² Luminance
The hard-coated anti-glare surface helps reduce disruptive reflections in indoor equipment environments. The listed white luminance is 220 cd/m².
This brightness level should be evaluated behind the final cover structure because cover glass, air gaps, bonding layers, surface treatments, and enclosure geometry can reduce perceived brightness. Projects exposed to strong daylight or outdoor conditions should use a display configuration specifically qualified for that environment.
Integrating the 11.6 Inch eDP Capacitive LCD Module
Qualifying the 30-Pin eDP Display Path
A 30-pin connector does not make two eDP panels automatically interchangeable. Before connecting the display, verify:
- Complete pin assignment
- eDP lane configuration and link requirements
- Native 1366 × 768 timing
- Panel and backlight power requirements
- Connector pitch and contact direction
- Cable orientation and length
- Backlight enable and brightness-control method
- Host or adapter-board firmware support
The module should not be connected to LVDS, MIPI DSI, HDMI, or parallel RGB output without appropriate conversion hardware.
Validating the Capacitive Touch Path
The eDP connection carries the image path. The capacitive touch path must be reviewed separately.
The approved assembly should identify the touch controller, touch communication interface, power requirements, FPC pinout, cable orientation, supported touch behavior, and host software requirements. Touch performance should be tested with the final cover structure, enclosure grounding, and intended operating environment.
When an Adapter Board Is Required
An adapter or controller board is required when the host does not supply a directly compatible eDP output or when the development platform uses HDMI, DisplayPort, USB-C, or another video source.
Board selection must be based on the exact panel model, resolution, lane configuration, timing, voltage, pinout, cable definition, and backlight requirements. Selecting a board only by “30-pin eDP” or “1366 × 768” can result in no image, unstable operation, incorrect colors, or hardware damage.
Mechanical and Power Planning
The active image area measures 256.13 × 144.00 mm. The typical LCD-module dimensions are 267.92 × 157.27 × 2.8 mm.
The enclosure review should account for:
- LCD and touch-sensor outlines
- Active-area visibility
- Bezel overlap
- Mechanical tolerances
- FPC exit position
- Cable bend radius
- Adapter-board clearance
- Touch cover thickness
- Assembly support and pressure distribution
- Access for prototype testing and service
The listed maximum power figure applies under specified panel test conditions. The complete system power budget must also include touch electronics, adapter-board conversion losses, and any external backlight-control circuitry.
Suitable Embedded Applications
This 11.6 Inch eDP Capacitive LCD Module can be evaluated for:
- Embedded HMI terminals
- Indoor industrial control panels
- Equipment operator consoles
- Compact self-service interfaces
- Building-control panels
- Test and measurement systems
- Development platforms using a qualified eDP adapter
- Smart terminals requiring widescreen touch interaction
Application approval should be based on interface compatibility, optical conditions, mechanical fit, temperature requirements, and prototype testing. No medical, automotive, payment-terminal, outdoor, or waterproof qualification is implied.
Customization and Sample Qualification
Project review can cover:
- Capacitive touch structure
- Touch controller and communication route
- Cover-lens dimensions and printing
- FPC shape, length, and orientation
- Cable and connector definition
- Adapter-board or controller-board matching
- Surface treatment
- Mechanical outline
- Front-window and enclosure fit
Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability, and the requested specification. Sample and standard-module quantities are confirmed separately.
Procurement Checklist
Before approving this display, submit or confirm:
- Host processor or motherboard model
- Native video output
- Complete eDP timing and lane requirements
- Full 30-pin assignment
- Panel and backlight voltage requirements
- Connector pitch, contact side, and orientation
- Touch controller and interface requirement
- Adapter-board model or required input interface
- LCD, touch, and cover-lens drawings
- Required operating environment
- Brightness target
- Sample quantity
- Estimated annual demand
- Target production schedule
FAQ
About 11.6 Inch eDP Capacitive LCD Module
What must be checked before connecting this module to a 30-pin eDP host?
Does matching the 1366 × 768 resolution guarantee adapter-board compatibility?
How should the capacitive touch connection be qualified separately from eDP video?
Is 220 cd/m² sufficient for the intended installation?
Which dimensions should control the enclosure design?
Freya Yang
+86 18318948097
