5.5 Inch 1080p Navigation LCD Module for Embedded Systems

5.5 Inch 1080p Navigation LCD Module for Embedded Systems

A slim Full HD portrait MIPI display for detailed navigation and embedded user interfaces.

The 5.5 Inch 1080p Navigation LCD Module is a portrait TFT component for navigation terminals, compact control devices, and high-detail embedded interfaces. It combines 1080 × 1920 resolution, MIPI communication, a 25-pin FPC, and a slim 71.04 × 129.01 × 1.56 mm outline.

The visible image area is listed as 68.04 × 120.96 mm, subject to confirmation against the controlled mechanical drawing. Host compatibility depends on the complete MIPI lane configuration, timing, voltage levels, pin assignment, and FPC orientation.

Key Specifications at a Glance

Final integration should follow the approved electrical specification, pin definition, timing table, mechanical drawing, and sample.

Full HD Portrait Content Design

The 1080 × 1920 native format provides a high-density portrait canvas for route maps, camera images, equipment data, detailed icons, and vertically structured menus.

Navigation UI planning

A navigation-oriented interface can allocate space for:

• Map or camera imagery
• Route guidance
• Destination and arrival information
• Status indicators
• Alerts and warnings
• Menu controls
• Device or network status

Content should be rendered at the native resolution whenever practical. Incorrect scaling can soften text, reduce usable space, or distort the portrait layout.

High-detail embedded graphics

The Full HD pixel count supports compact typography and detailed graphics, but resolution alone does not establish brightness, contrast, color accuracy, or viewing-angle performance. Those optical characteristics should be confirmed before the module is selected for a specific lighting environment.

MIPI and 25-Pin FPC Compatibility

The 5.5 Inch 1080p Navigation LCD Module uses a MIPI interface through a 25-pin FPC. The host must provide the correct lane configuration, native timing, voltage levels, control signals, and connector mapping.

A 25-pin MIPI connector does not guarantee compatibility with another 25-pin LCD module.

Required host information

Confirm before PCB release:

• MIPI lane count
• Clock and data-lane assignment
• Lane polarity and ordering
• Native 1080 × 1920 timing
• Complete 25-pin definition
• Logic and panel voltage requirements
• Reset and control signals
• FPC pitch and contact side
• Cable orientation
• Backlight and power connections

An unmatched pin assignment can prevent operation or cause electrical damage.

Non-MIPI interfaces require conversion

HDMI, USB, LVDS, eDP, and parallel RGB cannot connect directly to this panel without a suitable bridge or controller.

Controller selection must be based on the complete electrical and timing requirements rather than resolution and connector count alone.

ILI7807D role boundary

ILI7807D is identified as the LCD driver IC.

The identifier alone does not prove universal processor compatibility, a host-side register-programming process, or a particular power sequence. Datasheet-defined timing, control signals, voltage requirements, and power conditions must be verified for the complete module.

Mechanical Integration and Slim-Profile Design

The module measures 71.04 × 129.01 × 1.56 mm, supporting compact portrait assemblies where internal depth is limited.

Active area and front window

The listed active area is 68.04 × 120.96 mm. The enclosure design should distinguish between:

• Visible image area
• LCD outside dimensions
• Bezel overlap
• Mechanical tolerance
• FPC exit position
• Connector clearance
• Protective-front requirements

The front opening should be finalized from the controlled drawing rather than from the active-area value alone.

FPC handling

The product images show flexible connection tabs at the module edges. The enclosure must provide an appropriate bend radius, strain relief, and clearance from sharp edges, screws, brackets, and heat-generating components.

Temperature Range and Application Boundaries

The listed operating range is −20°C to +70°C, with storage from −30°C to +80°C. These values support evaluation for equipment exposed to wider temperatures than a typical indoor consumer device.

The temperature range does not establish automotive, medical, outdoor, vibration, waterproof, or other certification status.

Recommended Applications

The 5.5 Inch 1080p Navigation LCD Module may be considered for:

• GPS navigation terminals
• High-detail portrait embedded HMIs
• Compact smart controllers
• Portable test and service equipment
• Inspection and monitoring interfaces
• Portrait information terminals
• General embedded display systems

A different display architecture may be preferable when the project requires direct HDMI input, confirmed touch, specified high brightness, known wide-view optical performance, a complete controller board, or certified vehicle operation.

Customization and Project Qualification

Project review may cover:

• MIPI lane and timing definition
• FPC design and pin assignment
• Brightness target
• Mechanical adaptation
• Protective-front requirements
• Controller-board matching
• Packaging and branding

Custom configurations are generally reviewed from 1,000 pieces, subject to tooling requirements, material availability, and the requested specification. Sample and standard-module quantities are confirmed separately.

Procurement Checklist

Before sample approval, confirm:

1. Native 1080 × 1920 portrait requirement
2. MIPI lane count and mapping
3. Complete 25-pin assignment
4. Logic and panel voltages
5. Native timing requirements
6. Reset and control signals
7. FPC pitch, contact side, and orientation
8. ILI7807D-related module requirements
9. Active-area confirmation
10. Module outline: 71.04 × 129.01 × 1.56 mm
11. Brightness and viewing requirements
12. Touch requirement
13. Operating environment
14. Controller-board requirement
15. Sample quantity
16. Annual demand
17. Qualification schedule
18. Production timing