Freya Yang
+86 18318948097
+852 62667476
7 Inch 1000 Nits Outdoor HMI Display Module with 40-Pin LVDS
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HSO70R27BE50-A25
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Control Type
Operating Environment
Motherboard Type
Designed For
7 Inch 1000 Nits Outdoor HMI Display Module with 40-Pin LVDS
1024×600 TN TFT LCD Module with 800:1 Contrast and Optional RTP or CTP
The 7 Inch 1000 Nits Outdoor HMI Display Module is a 1024×600 TN TFT component for equipment interfaces that operate under strong ambient light. It combines 1000 cd/m² typical luminance, a compact 40-pin LVDS connection, 800:1 typical contrast and a 164.86 × 99.96 × 5.5 mm module structure. Optional resistive or capacitive touch configurations can be evaluated for projects requiring direct user interaction.
Direct-sunlight performance depends on the complete optical stack, including cover glass, reflection control, bonding, installation angle and thermal conditions.
Key Specifications at a Glance
| Parameter | Specification |
|---|---|
| Display size | 7.0 inch |
| Resolution | 1024 × 600 |
| Pixel format | 1024 × RGB × 600 |
| Panel technology | TN TFT |
| Optical mode | Normally white, transmissive |
| Brightness | 1000 cd/m² typical |
| Viewing angle | 80/80/60/70 typical, CR≥10 |
| Contrast ratio | 800:1 typical |
| Response time | 25 ms typical, Tr+Tf |
| Interface | 40-pin LVDS FPC |
| Active area | 154.21 × 85.92 mm |
| Module outline | 164.86 × 99.96 × 5.5 mm |
| Dot pitch | 0.1506 × 0.1432 mm |
| Backlight | 27-chip WLED |
| Backlight reference | 9.6 V / 180 mA |
| Backlight life | 30,000 hours typical |
| Operating temperature | −20°C to +70°C |
| Storage temperature | −30°C to +80°C |
| Touch configuration | Optional RTP or CTP |
Final electrical, optical and mechanical values are subject to the approved datasheet, drawing and sample validation.
High-Brightness TN Performance for Equipment Interfaces
The module provides a substantial luminance increase over standard indoor LCD configurations while retaining a cost-conscious TN panel architecture. Its 1024×600 landscape format supports status information, menus, graphical controls, alarms and equipment data without requiring a large enclosure.
1000 cd/m² luminance and use environment
The 1000 cd/m² typical backlight is suitable for outdoor-facing equipment and other high-ambient-light installations where conventional lower-brightness modules may appear washed out.
Brightness alone does not guarantee readability under every direct-sunlight condition.
A sample should be evaluated with the intended cover glass, enclosure angle, surface treatment and operating temperature before the optical configuration is approved.
TN viewing behavior
The specified viewing angles are 80° left, 80° right, 60° up and 70° down under the stated contrast criterion. This asymmetry should be considered when fixing the screen angle in a kiosk, machine console or operator panel.
TN technology can provide practical response and cost characteristics, but the mounting orientation must match the primary user position. A sample review is particularly important when operators will approach the screen from different heights.
Contrast and response
An 800:1 typical contrast ratio supports clear separation among text, icons, status colors and background areas. The listed 25 ms typical response time is appropriate for normal HMI transitions, menu navigation and monitoring data, but it should not be treated as a high-refresh gaming specification.
7 Inch 1000 Nits Outdoor HMI Display Module Interface Compatibility
The standard signal connection is a 40-pin LVDS FPC. LVDS is a panel-level interface rather than a consumer video connector, so the host must generate the module’s native resolution, timing and electrical mapping.
A 40-pin connector is not a universal pinout
A 40-pin LVDS connector does not guarantee compatibility with another 40-pin display.
The engineering review must confirm:
- LVDS channel and bit mapping
- native 1024×600 timing
- pixel-clock and synchronization requirements
- electrical supply rails
- FPC contact side and orientation
- backlight power and control arrangement
- connector pitch and mechanical position
Connecting an unmatched host or cable can produce no image, unstable output or electrical damage.
HDMI, USB, MIPI and eDP conversion
This module cannot connect directly to HDMI, USB, MIPI DSI or eDP without suitable conversion hardware.
A controller board may be required when the host does not provide the correct native LVDS output. Controller selection should be based on the module timing table and complete pin assignment rather than resolution alone.
Backlight power planning
The backlight is listed as a 27-chip WLED system with a 9.6 V / 180 mA electrical reference. The host design must account for the specified backlight circuit, suitable current regulation and any required enable or brightness-control functions defined in the approved documentation.
Mechanical Integration and Enclosure Fit
The active image area is 154.21 × 85.92 mm. The module outline is 164.86 × 99.96 × 5.5 mm, providing a compact landscape structure for control panels and embedded terminals.
Window and bezel design
The enclosure window should expose the active area without masking edge pixels. Mechanical tolerances, bezel overlap and assembly variation should be included in the front-panel drawing.
The final opening should be determined from the controlled mechanical drawing rather than the active-area dimensions alone.
FPC routing and clearance
The FPC extends from the lower part of the module. The enclosure must provide sufficient bend radius and avoid pressure on the cable exit. Cable routing should also keep the connection away from sharp edges, mounting bosses and high-temperature components.
Touch-stack impact
RTP or CTP is optional rather than standard. Adding touch changes the front outline, thickness, optical reflection, connector arrangement and cover-lens design. The selected touch technology and interface must therefore be specified before the enclosure is finalized.
Recommended Applications and Selection Boundaries
This high-brightness TN module may be considered for:
- Industrial control panels
- Outdoor-facing equipment HMIs
- Agricultural or construction machinery interfaces
- Kiosk and vending-machine control areas
- Transportation information terminals
- Embedded monitoring systems
- Smart equipment and automation panels
The 7 Inch 1000 Nits Outdoor HMI Display Module is most appropriate when the system already provides compatible LVDS output or can accommodate a dedicated controller board.
Additional engineering qualification is required for installations involving continuous direct sun, extreme thermal loading, vehicle compliance, medical certification, waterproofing, heavy vibration or safety-critical operation.
Customization Options
Project evaluation can include:
- FPC shape, direction and pin definition
- Backlight type and brightness
- Optional RTP or CTP
- Cover lens dimensions and printing
- Mechanical adaptation
- Controller-board matching
- Packaging and labeling
Optional features should not be treated as standard until the configuration, drawing, interface and sample have been approved.
Procurement Checklist
Before ordering samples or planning production, confirm:
Qualification and production schedule
Native 1024×600 host output
Complete 40-pin LVDS pin assignment
LVDS channel and color-depth mapping
FPC pitch, orientation and contact side
Supply and backlight electrical requirements
Required viewing direction
Target ambient-light environment
Standard module, RTP or CTP configuration
Active-area and enclosure-window fit
Module outline and FPC clearance
Operating and storage temperature
Controller-board requirement
Sample quantity and annual forecast
FAQ
about 7 Inch 1000 Nits Outdoor HMI Display Module
Is 1000 cd/m² automatically readable in direct sunlight?
Can any 40-pin LVDS controller operate this module?
Is touch included as standard?
Can the module connect directly to HDMI?
Is the module suitable for a fixed-angle operator panel?
What is the typical lead time for custom display modules with specific interface requirements?
Lead time for custom display modules depends on the specific configuration, including interface type, touch option, and any optical bonding requirements. For exact lead time for your project with specific interface requirements, please contact our sales team with your detailed specifications so we can provide a confirmed schedule.
Do you offer displays with high refresh rates (e.g., 120Hz) for smooth graphics in transportation information systems?
This 7-inch display module has a standard 60 Hz refresh rate, which is suitable for most HMI and information display applications. For transportation systems requiring 120 Hz or higher, we recommend discussing your specific graphics smoothness needs with our engineering team. We can evaluate if alternative panel options or custom configurations can meet higher refresh rate demands.
What interface options (e.g., LVDS, eDP) are available for your this size panels, and what are the pin configurations?
This 7-inch display module uses a 40-pin LVDS interface as standard. LVDS is the most common interface for industrial TFT panels in this size range due to its low EMI and high data integrity over short distances. For detailed pin assignments and electrical specifications, please request the datasheet for model HSO70R27BE50-A25.
What are the operating temperature ranges for your industrial LCD panels, especially for extended outdoor use?
The operating temperature range for this display module is -20°C to +70°C, with storage from -30°C to +80°C. For extended outdoor use, ensure proper thermal management and consider the complete optical stack. If your application requires wider temperature extremes, please contact us to discuss potential custom solutions.
What are the warranty terms and after-sales service for your display products?
Warranty terms and after-sales service details are provided upon request and depend on the specific order and application. We offer standard warranty coverage for manufacturing defects and provide technical support for integration. For exact warranty duration and service scope, please contact our sales team with your project details.
Freya Yang
+86 18318948097
