LCD Panel Inventory -Advanced Search

~

~

~

~

~

~

MNF601EA1-7 Antiglare UHD Notebook Display 15.6″ Laptop CSOT

Product Gallery
Key Specs

Model P/N

MNF601EA1-7

Size

15.6″

Resolution

3840×2160

Brightness

600 cd/m² (Typ.)

Viewing Angle

89/89/89/89 (Typ.)(CR≥10)

Connector Type

eDP (4 Lanes), eDP1.4, HBR2 (5.4G/lane), 40 pins 0.5mm Connector

Operating Temp

0 ~
50 °C

Overall(mm)

350.72(W)×
216.07(H)×
2.6(D)
Upgrade Options (OEM/ODM)

csot

MNF601EA1-7

LCD Panel Specifications

Brand

CSOT

Panel Size (inch)

15.6"

Model P/N

MNF601EA1-7

Resolution

3840×2160

Brightness (nits)

600 cd/m² (Typ.)

Viewing Angle

89/89/89/89 (Typ.)(CR≥10)

Contrast Ratio

1500:1 (Typ.) (TM)

Response Time

25 ms (Typ.)(Tr+Td)

Overall (mm)

350.72(W)×
216.07(H) ×
2.6(D) mm

Active Area (mm)

345.6 × 194.4 mm

Refresh Rate

60Hz

Display Colors

16.7M, 99% Adobe RGB

Panel Type

LTPS TFT-LCD, LCM

Connector Type

eDP (4 Lanes), eDP1.4, HBR2 (5.4G/lane), 40 pins 0.5mm Connector

Surface Treatment

Antiglare, Hard coating (3H)

Operating Temp

0 ~
50 °C

Touchscreen Type

Without Touch Screen

Storage Temp

-20°C to 60°C

Work Mode

FFS, Normally Black, Transmissive

Pixel Format

RGB Vertical Stripe

Input Voltage (V)

3.3V (Typ.)

Designed For

Laptop | 15.6-inch UHD antiglare wide-gamut notebook display integration | Exact-model replacement/qualification subject to eDP and mechanical validation

Product Details

Product Overview

MNF601EA1-7 Antiglare UHD Notebook Display is a 15.6-inch CSOT LTPS TFT-LCD LCM for laptop display integration. The module combines a 3840(RGB)×2160 UHD raster, FFS normally-black transmissive operation, 600 cd/m² typical luminance and 16.7M colors with 99% Adobe RGB wording. This exact model is explicitly specified as Antiglare with hard coating (3H), giving the surface requirement a direct exact-model basis. Its active area is 345.6 × 194.4 mm, the outline is 350.72 × 216.07 × 2.6 mm, and mass is 280±10 g.

The exact-model specification includes the feature wording “HDR400.” That phrase is preserved as a product feature label, but it is not promoted to “VESA DisplayHDR 400 certified” because model-specific certification is not documented. The panel operates at 60 Hz, uses four-lane eDP 1.4 HBR2 on a 40-pin 0.5 mm connector, runs from 3.3 V typical and includes a WLED backlight with LED driver. It is supplied without touch.

Three Core Buyer Value Propositions

1. Antiglare plus 600-nit luminance gives a defined notebook optical starting point

The exact surface and luminance facts can be evaluated together rather than treating brightness alone as the visibility story. Antiglare treatment can reduce distracting reflections in indoor mobile-workstation use, while 600 cd/m² typical luminance provides a measurable panel output target. The boundary is system visibility: cover layers, room lighting, automatic brightness behavior and calibration affect the finished notebook, so neither value proves sunlight readability or an outdoor grade.

2. 99% Adobe RGB supports wide-gamut qualification with an explicit calibration boundary

The panel is documented with 16.7M colors and 99% Adobe RGB, giving color-sensitive projects a strong gamut requirement to verify. Buyers can use that specification to screen panels for imaging, creative or workstation-oriented notebook platforms. Gamut coverage does not define color error, gamma, white point, profile quality or panel-to-panel uniformity. Those characteristics need acceptance limits and measurement on the production system.

3. 280±10 g mass and 2.6 mm depth improve lid-level engineering control

The 280±10 g mass, 2.6 mm module depth and known 350.72 × 216.07 mm outline provide more complete mechanical inputs than a screen-size label alone. These values support weight budgeting, hinge-load review and lid-cavity screening. They still do not prove interchangeability with another 15.6-inch 4K LCM because connector position, mounting construction, cable routing and local keep-out zones need the current drawing or approved sample.

Key Specifications at a Glance

ParameterConfirmed value
Manufacturer / modelCSOT MNF601EA1-7
Display size15.6 inch
Panel typeLTPS TFT-LCD, LCM
Native resolution3840(RGB)×2160 UHD, 16:9
Active area345.6 × 194.4 mm
Outline350.72 × 216.07 × 2.6 mm
Weight280±10 g
Brightness600 cd/m² typical; HDR400 feature wording
Contrast ratio1500:1 typical
Viewing-angle values89/89/89/89 typical at CR≥10
Response time25 ms typical, Tr+Td
Colors16.7M, 99% Adobe RGB
SurfaceAntiglare, hard coating 3H
Refresh rate60 Hz
Native interfaceeDP 1.4, 4 lanes, HBR2 5.4 Gbit/s per lane
Connector40 pins, 0.5 mm pitch
Panel input3.3 V typical
BacklightWLED, 15K hrs, with LED driver
TouchWithout touch screen
Operating / storage0 to 50 °C / -20 to 60 °C

Does “HDR400” mean VESA DisplayHDR 400 certification?

No automatic certification claim is made. VESA’s DisplayHDR program explains that only displays meeting the specification and certification requirements may carry the DisplayHDR logo, and its performance criteria include multiple luminance, black-level, color and signal requirements. MNF601EA1-7 is documented with “HDR400” feature wording, but model-specific certification is not documented.

For MNF601EA1-7 Antiglare UHD Notebook Display, treat HDR400 as a documented feature label that triggers additional system qualification. Validate HDR input handling, tone mapping, luminance behavior, black level, color performance and thermal operation on the intended notebook. Do not infer a formal compliance tier from the panel’s 600 cd/m² typical luminance alone, because certification evaluates more than a single brightness number.

How should the antiglare surface be verified?

The documented surface specification is Antiglare, Hard coating (3H). That supports a matte-surface application statement without inventing a haze percentage that is not supplied. Incoming-quality inspection should compare reflection appearance, scratches and surface contamination against the approved sample. If the notebook adds a cover lens, protective film or touch layer, the optical stack can alter reflectance and should be re-evaluated as a complete assembly.

The antiglare finish also interacts with pixel density. At 3840×2160 on a 15.6-inch panel, fine text and image detail can be affected by both software scaling and the front-surface scattering behavior. Product teams should test representative user-interface and image content rather than treating antiglare as unconditionally better. The exact surface requirement should be included in supplier acceptance documents when consistency matters.

What should a color-managed notebook validate beyond 99% Adobe RGB?

The gamut figure identifies coverage, not accuracy. A professional notebook should define the target white point, gamma or transfer function, profile behavior, color error and uniformity limits that matter to its use case. The display pipeline includes the GPU, operating system, color profile, panel and brightness setting, so a panel with 99% Adobe RGB can still produce poor color results if the system is not configured and calibrated correctly.

TCL CSOT’s notebook display overview shows the manufacturer’s broader focus on high-resolution and high-gamut laptop displays. That context supports the laptop market direction but does not add unlisted capabilities to this exact suffix. MNF601EA1-7 should be qualified from its own 99% Adobe RGB, 1500:1 contrast, 600 cd/m² and antiglare evidence.

Interface bring-up: four-lane HBR2 eDP 1.4

The four-lane HBR2 link must carry the native 3840×2160 timing at 60 Hz through the 40-pin connector. Qualification should cover link training, AUX communication, cable integrity, connector orientation, 3.3 V power sequencing, cold boot and resume from low-power states. Even when two panels share “eDP 1.4” wording, their pin assignment, connector position and timing tables may differ.

The panel interface should not be confused with the notebook’s external ports. USB-C, HDMI and external DisplayPort connections terminate at system graphics or bridge electronics; the internal module receives its own eDP link. This distinction is important in controller troubleshooting because an external port format does not prove panel-side compatibility. Use the production motherboard and actual display cable for final bring-up testing.

Mechanical control and incoming mass verification

The module is specified at 280±10 g. For a thin notebook lid, that tolerance can be included in hinge torque, structural balance and total system mass calculations. The 2.6 mm outline depth is similarly useful for rear-cover clearance. Neither dimension should be generalized to another suffix or compatible 4K panel, because local mounting points, connector placement and PCBA geometry can change even when the overall screen size is similar.

Incoming inspection should verify label identity, mass where relevant, outline, connector condition and visible surface quality before the panel is built into the lid. A substitute carrying a different suffix should be quarantined for engineering review rather than passed solely on resolution and connector count. This is particularly important in wide-gamut projects where changing the panel can also change surface, gamut, brightness or calibration behavior.

Backlight and temperature boundaries

The WLED backlight includes an LED driver and carries a 15K-hour reference. That is a component backlight-life figure, not a guarantee of notebook useful life or supplier availability. High-luminance operation can increase thermal load, so prototype qualification should include sustained brightness testing and thermal observation at the target system conditions. The 600 cd/m² value should remain a panel specification, not a supply or reliability promise.

Operating temperature is 0 to 50 °C and storage temperature is -20 to 60 °C. These limits do not establish rugged, industrial-wide-temperature or automotive grade. If a notebook must operate outside normal portable-computer environments, the project needs separate environmental evidence and system testing rather than an inference from LTPS technology or the HDR feature wording.

Application fit and replacement boundaries

MNF601EA1-7 Antiglare UHD Notebook Display is designed for laptop use. Its most defensible application is a 15.6-inch UHD notebook platform that needs antiglare surface treatment, 600 cd/m² typical luminance, wide Adobe RGB coverage and a four-lane HBR2 eDP interface. Exact-model replacement is also reasonable when the installed panel label is MNF601EA1-7, but no claim is made that it fits every 15.6-inch 4K notebook.

The module has no touch panel. A touch-enabled laptop requires separate evidence for sensor, controller, cover stack and cabling. Likewise, no formal HDR, medical, industrial or automotive qualification is inferred. Those boundaries should remain clear so buyers can distinguish confirmed panel capabilities from requirements that still need project-level verification.

Procurement dossier for MNF601EA1-7

  • Record the exact model suffix and reject unapproved substitutions during incoming inspection.
  • Confirm 3840×2160 native timing, 60 Hz operation and four-lane HBR2 eDP 1.4.
  • Verify the 40-pin 0.5 mm connector, cable pinout, connector location and 3.3 V panel power sequence.
  • Check the 350.72 × 216.07 × 2.6 mm outline and 280±10 g mass against lid and hinge requirements.
  • Validate 600 cd/m² luminance, antiglare surface and 99% Adobe RGB in the production optical stack.
  • Treat HDR400 as feature wording unless model-specific DisplayHDR certification evidence is supplied.
  • Confirm that the platform does not require an integrated touch layer.
  • Test backlight control, image uniformity, sleep/resume and thermal operation on the intended motherboard.
  • Request current revision, quantity and change-status information before volume procurement; do not infer a guaranteed supply horizon.

For MNF601EA1-7 Antiglare UHD Notebook Display qualification, submit the target notebook platform, production eDP cable, mechanical drawing, desired color-calibration limits, HDR acceptance plan, luminance requirement and quantity. The decision should remain tied to the exact suffix and its measured behavior instead of to a generic 15.6-inch 4K panel category.

Applications & Value of LCD Panel

Engineering test diagram

FAQ

About MNF601EA1-7 Antiglare UHD Notebook Display

Does HDR400 mean MNF601EA1-7 is VESA DisplayHDR 400 certified?

No. HDR400 is documented as an exact-model feature phrase, but model-specific VESA DisplayHDR certification is not documented. Keep the feature wording separate from a certification claim, then qualify HDR behavior on the finished notebook. Formal DisplayHDR claims require the applicable certification evidence rather than inference from the panel’s 600 cd/m² typical luminance.

What does the antiglare surface change for MNF601EA1-7?

The exact model is documented with Antiglare and Hard coating (3H), so a matte-surface statement is supported. Antiglare can reduce reflections, but finished behavior also depends on any cover, touch stack and ambient lighting. Inspect production samples for surface consistency and measure the complete optical stack if reflectance or image detail is a controlled requirement.

How should 99% Adobe RGB be validated on this panel?

Use the 99% Adobe RGB value as a gamut-coverage target, not as a complete color-accuracy specification. The finished notebook should be checked for white point, gamma or transfer response, color error, uniformity and profile behavior at the intended brightness settings. GPU output and operating-system color management remain part of the system result.

What eDP interface does MNF601EA1-7 use?

It uses four-lane eDP 1.4 at HBR2, 5.4 Gbit/s per lane, on a 40-pin 0.5 mm connector with 3.3 V typical panel input. Verify the exact timing, pin assignment, AUX behavior, connector position, cable orientation and power sequence. A generic 40-pin 4K cable does not prove electrical compatibility.

Why does the 280±10 g panel weight matter?

The 280±10 g mass can be included in notebook lid balance, hinge torque and total system-weight calculations. The module outline is 350.72 × 216.07 × 2.6 mm, so mechanics should be qualified together rather than by mass alone. A different 15.6-inch 4K suffix may have different connector or structural details even if its outer size looks similar.

What should procurement lock before ordering MNF601EA1-7?

Lock the exact suffix, antiglare requirement, 3840×2160 timing, four-lane HBR2 eDP 1.4 path, 40-pin connector, 3.3 V input, 600-nit target, 99% Adobe RGB wording and no-touch configuration. Request current revision and change-status information for repeat buying. Do not convert marketplace stock or an “in production” listing into a guaranteed long-term supply commitment.
Scroll to Top
Request Quote / Datasheet

Response within 12-24 hours. NDA available. Engineering support included.

Fields marked with an asterisk (*) are required.

Contact Information

Request Details

Download Datasheet

Please input your e-mail address to start the download.

WeChat QR code

Scan the QR code with your phone to contact us.