Freya Yang
+86 18318948097
+852 62667476
11.6 Inch 1000 Nits Outdoor LCD Display Kit for Signage
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS116-3052
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Input Voltage (V)
Weight (g)
Included Accessories
Operating Environment
I/O Interface
Designed For
11.6 Inch 1000 Nits Outdoor LCD Display Kit for Signage
A 1000 Nits Outdoor LCD Display Kit gives integrators a compact 11.6-inch display-and-controller path for equipment that needs strong panel luminance and external video input. The 1366 × 768 TN panel provides 1000 cd/m² typical luminance and connects to the controller through a 30-pin, single-channel, 8-bit LVDS interface. The kit is suited to protected outdoor-facing signage, bright commercial installations and embedded display assemblies where DVI or VGA input is useful. Outdoor deployment still requires optical, thermal and environmental validation at the finished-system level.
Product Summary
The 11.6-inch panel uses a native 1366 × 768 raster with a 256.125 × 144 mm active area and a 282.2 × 168 × 13 mm outline. Its optical mode is TN, Normally White and Transmissive, with a 450:1 typical contrast ratio and raw viewing-angle data of 60/60/35/35 at CR ≥ 10.
A matching 30-pin connector does not prove LVDS compatibility.
DVI and VGA are controller-side video inputs; the LCD panel itself uses a separate LVDS connection.
A 1000 cd/m² panel does not by itself establish direct-sun readability in the finished product.
Key Specifications
| Specification | Value |
|---|---|
| Display size | 11.6 inches |
| Native resolution | 1366 × 768 pixels |
| Panel mode | TN, Normally White, Transmissive |
| Brightness | 1000 cd/m² typical |
| Contrast ratio | 450:1 typical |
| Viewing-angle data | 60° / 60° / 35° / 35° typical at CR ≥ 10; direction order not confirmed |
| Active area | 256.125 × 144 mm |
| Panel outline | 282.2 × 168 × 13 mm |
| Panel interface | 30-pin, single-channel, 8-bit LVDS |
| Panel input | 3.3 V typical |
| Backlight | WLED |
| Controller | M.T68676 |
| Controller inputs | DVI and VGA |
| Controller board size | 125 × 53 × 17 mm |
| Controller supply | 12 V DC, more than 3 A |
| Controller standby | <1 W |
1366 × 768 Format for Compact Signage
The native 1366 × 768 format provides a familiar 16:9 workspace for promotional graphics, status information, simple menus and player content without requiring a large enclosure.
Use Native Timing During Qualification
A controller should be configured for the approved panel timing rather than selected only by resolution. The 1366 × 768 raster, 30-pin connector and single-channel 8-bit LVDS architecture all need to match the controller firmware, cable and panel definition.
Mechanical Fit Requires Both Panel and Board Space
The LCD occupies 282.2 × 168 × 13 mm, while the controller board uses a separate 125 × 53 × 17 mm envelope. Cable routing, keypad access, backlight-board placement and connector clearance should be checked before the enclosure is released.
Optical Planning for Outdoor-Oriented Installations
The 1000 cd/m² typical panel output is the main reason this configuration can be evaluated for high-ambient-light equipment. Brightness alone does not define finished outdoor readability.
Validate the Complete Front Stack
Cover glass, air gaps, surface reflections, mounting angle and enclosure shading can reduce usable contrast. The 450:1 typical panel contrast should therefore be evaluated with the actual front window and intended lighting condition rather than treated as a direct-sun guarantee.
TN Viewing Geometry Matters
The panel provides raw 60/60/35/35 viewing-angle values at CR ≥ 10. Because the directional order is not confirmed, the approved panel documentation should define which value corresponds to each direction before the enclosure orientation is frozen.
1000 Nits Outdoor LCD Display Kit Controller Integration
This 1000 Nits Outdoor LCD Display Kit is supplied as a panel-and-controller combination rather than a bare LCD alone. That changes the integration path: DVI or VGA is presented to the controller, and the controller converts the selected video input to the panel-side LVDS connection.
30-Pin LVDS Still Needs Full Compatibility Checks
The panel interface is single-channel, 8-bit LVDS with a 30-pin connector. Pin count is only one part of compatibility. Native timing, logic voltage, LVDS mapping, connector orientation, cable wiring and controller firmware all need to be locked to the approved production configuration.
Separate the 3.3 V Panel Rail from the 12 V Controller Supply
The LCD panel uses a 3.3 V typical input, while the controller configuration requires 12 V DC at more than 3 A. These are separate electrical requirements. The controller's standby value below 1 W is not the maximum operating power of the complete kit and should not be used to size the power supply.
DVI and VGA Input for External Video Devices
The M.T68676 controller provides DVI and VGA video-input paths and a speaker connector. This suits systems that already use a PC, industrial computer or media player.
Controller-Side Inputs Do Not Change the Panel Interface
The LCD itself remains an LVDS panel. DVI and VGA belong to the controller side of the signal chain, so a buyer evaluating another host or another controller should verify both the input video format and the outgoing LVDS configuration.
The controller also provides OSD adjustment functions and a wired keypad for local setup.
Application Fit and Boundaries
The 1000 Nits Outdoor LCD Display Kit can be considered for protected outdoor-facing advertising assemblies, sheltered kiosks, compact information displays, machine-mounted screens and bright commercial installations where 11.6-inch geometry and external DVI/VGA input are useful.
It should not be treated as a finished weatherproof monitor. No product-specific ingress-protection rating, protective-glass specification, direct-sun guarantee, touch function or approved operating-temperature range is confirmed for the complete kit. Those requirements need separate qualification.
Configuration and Customization Review
Project review can cover controller firmware, 30-pin LVDS mapping, cable definition, front glass, AG/AR treatment, optical bonding, enclosure adaptation, mounting, separately engineered touch, branding and packaging.
Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability and the requested specification. Sample and standard-kit quantities are confirmed separately.
Procurement Checklist
Confirm the approved LCD and controller revisions; native 1366 × 768 timing; complete 30-pin single-channel 8-bit LVDS mapping; 3.3 V panel requirement; WLED/backlight-board electrical requirements; 12 V DC controller supply above 3 A; maximum operating power; 256.125 × 144 mm active area; 282.2 × 168 × 13 mm panel outline; 125 × 53 × 17 mm controller-board envelope; front-window optical stack; required environmental limits; touch requirement; sample quantity and annual demand.


FAQ
About 11.6 Inch 1000 Nits Outdoor LCD Display Kit
What must be checked before using another 30-pin LVDS controller?
Is 1000 cd/m² sufficient behind the final signage front window?
How do DVI and VGA relate to the 30-pin LVDS panel connection?
Why are both 3.3 V and 12 V specified for this kit?
Which dimensions should control enclosure planning?
Freya Yang
+86 18318948097





