Freya Yang
+86 18318948097
+852 62667476
21.5 Inch High Brightness Industrial Touch Display for Production HMI
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS01Q215TC-V1
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Touch Interface
Control Type
Operating Environment
Designed For
21.5 Inch High Brightness Industrial Touch Display for Production HMI
This High Brightness Industrial Touch Display combines Full HD IPS imaging, 1000 cd/m² luminance and USB-connected PCAP touch for production workstations.
Product Summary
The 21.5-inch display assembly provides a large interactive workspace for production HMI consoles, industrial automation workstations, process-monitoring desks and operator-control systems. Its native 1920 × 1080 resolution supports detailed status pages, process graphics, camera views, alarms and operating controls on one screen.
Projected-capacitive touch adds direct interaction, while the USB touch connection allows the touch function to be linked separately to the system host. The 1000 cd/m² luminance provides a stronger optical starting point for brightly illuminated production areas and other high-ambient professional environments.
Key Specifications
| Parameter | Value |
|---|---|
| Display size | 21.5 inch |
| Native resolution | 1920 × 1080 pixels |
| Display format | Full HD, 16:9 |
| Panel technology | IPS TFT-LCD |
| Luminance | 1000 cd/m² |
| Touch technology | Projected-capacitive touch |
| Touch interface | USB |
| Viewing-angle sequence | 80/80/80/80 |
| Backlight | LED backlight |
| Listed operating temperature | −10°C to +60°C |
Full HD Workspace for Production Interfaces
Native 1920 × 1080 Content
The interface should be developed at the native 1920 × 1080 raster. Native-resolution content helps preserve text edges, line thickness, icon detail and chart clarity without relying on controller scaling.
The Full HD workspace can accommodate:
- machine-status dashboards
- process trends
- alarm lists
- equipment controls
- production counters
- camera feeds
- diagnostic pages
- maintenance instructions
- operating procedures
Large-Format Operator Layout
A 21.5-inch screen provides room for larger controls and clearer information grouping than compact embedded displays. Engineers can separate navigation, process data, warnings and live equipment status into defined zones rather than compressing all functions into one small interface.
The final UI should still consider operator viewing distance, touch-target size and installation height.
1000 cd/m² Optical Performance
High-Ambient Visibility
The 1000 cd/m² luminance specification supports evaluation in factories, production areas, operator stations and control rooms with strong ambient lighting.
Final visibility also depends on:
- cover-glass transmission
- surface reflections
- air gaps
- optical bonding
- installation angle
- enclosure shading
- UI contrast
- operating temperature
- backlight control
The high luminance specification should be evaluated with the complete finished optical stack.
Finished Optical Stack Testing
A 1000 cd/m² panel does not automatically establish direct-sun readability. A cover lens or touch stack can introduce reflection and transmission losses that materially change the finished-system result.
Qualification should include:
- ambient-light testing
- reflected-image evaluation
- dark-state visibility
- cover-glass transmission
- touch-layer optical loss
- thermal luminance testing
- day and night brightness settings
High Brightness Industrial Touch Display Integration
Separate Video and Touch Paths
The display image and touch data should be treated as separate system paths.
USB is identified as the touch interface. It carries touch-coordinate data to the host and does not replace the video connection needed to generate the image.
The host system must therefore provide:
- a qualified video path
- a USB touch connection
- compatible touch drivers
- stable power
- grounding
- cable routing
- operating-system support
LVDS and HDMI Architecture Confirmation
The available product information refers to both LVDS and HDMI. These references must be reconciled before controller or cable selection.
The approved system documentation should identify:
- native panel interface
- controller-board input
- number of LVDS channels
- bit mapping
- timing
- connector assignment
- panel voltage
- backlight driver
- HDMI input format, when present
- USB touch-controller connection
Do not assume that HDMI is the native panel interface or that a generic LVDS cable will be compatible.
PCAP Touch Qualification
Projected-capacitive touch can support direct operator interaction, gesture-based navigation and software controls. The production configuration should be validated with the actual cover stack, controller and operating system.
Qualification should check:
- supported touch-point count
- USB descriptor
- operating-system compatibility
- coordinate orientation
- edge accuracy
- palm rejection
- wet-finger behavior
- glove requirements
- touch latency
- electromagnetic interference
- grounding
- cover-glass thickness
- touch-controller firmware
The product title refers to 10-point capacitive touch, but the production release should be supported by a touch-controller specification and functional test report.
Thermal and Compliance Boundaries
The listed operating range is −10°C to +60°C. This range should be verified against the approved production datasheet before environmental testing.
The review should also confirm:
- storage temperature
- cold-start behavior
- high-temperature luminance
- touch operation across temperature
- condensation conditions
- humidity limits
- backlight derating
- controller-board thermal limits
REACH and RoHS compliance are listed, but project release should use the current declarations for the supplied display, touch panel, controller and cable configuration.
Recommended Applications
Production HMI Consoles
The Full HD screen can combine machine controls, status data, alarms and process graphics in one interactive interface.
Industrial Automation Workstations
The large touch area is suitable for operator stations that manage production lines, inspection processes or automated equipment.
Process-Monitoring Desks
The display can present real-time trends, equipment state, event logs and camera information in a centralized layout.
Control-Room Interfaces
The 21.5-inch workspace supports supervisory interfaces where operators need clear information grouping and direct touch input.
High-Ambient Professional Systems
The 1000 cd/m² luminance supports evaluation in brightly illuminated professional installations, subject to finished-stack optical validation.
Custom Integration Options
Project review can cover:
- video controller selection
- LVDS or HDMI architecture
- USB touch integration
- touch-controller tuning
- cover glass
- anti-glare or anti-reflection treatment
- optical bonding
- enclosure adaptation
- mounting design
- cable routing
- connector orientation
- branding
- labeling
- packaging
Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability and the requested specification. Samples and standard quantities are confirmed separately.
Procurement Checklist
Before sample or production approval, submit or confirm:
- approved 1920 × 1080 timing
- native panel video interface
- controller-board input
- LVDS channel count and bit mapping, when applicable
- complete connector pin assignment
- panel voltage
- backlight voltage and current
- power sequence
- USB touch protocol
- touch-controller model
- 10-point touch test report
- supported operating systems
- module dimensions
- mounting points
- connector orientation
- cable drawings
- cover-glass stack
- target ambient lighting
- 1000 cd/m² luminance requirement
- exact operating and storage ranges
- REACH and RoHS documents
- sample quantity
- annual demand
- production schedule
FAQ
About 21.5 Inch High Brightness Industrial Touch Display
What must be confirmed between the LVDS and HDMI listings?
Which connection carries touch data?
Does 1000 cd/m² guarantee sunlight readability?
What must be checked before approving 10-point touch?
Which environmental and compliance documents are required?
Freya Yang
+86 18318948097
