LCD Panel Inventory -Advanced Search

~

~

~

~

~

~

QMC265FA01-D01 Q-Square QHD OLED Module 26.5″ Samsung

Product Gallery
Key Specs

Model P/N

QMC265FA01-D01

Size

26.5″

Resolution

2560×1440

Brightness

250 cd/m² (Typ.)

Viewing Angle

89/89/89/89 (Min.)(CR≥10000)

Connector Type

V-by-One 16 lanes, 163 pins 0.5mm Connector

Operating Temp

0 ~
45 °C

Overall(mm)

606.31(W)×
344.2(H)×
2.06(D)
Upgrade Options (OEM/ODM)

samsung

QMC265FA01-D01

LCD Panel Specifications

Brand

Samsung

Panel Size (inch)

26.5"

Model P/N

QMC265FA01-D01

Resolution

2560×1440

Brightness (nits)

250 cd/m² (Typ.)

Viewing Angle

89/89/89/89 (Min.)(CR≥10000)

Contrast Ratio

1,500,000:1 (Typ.)

Response Time

0.1 ms (Typ.)(G to G)

Overall (mm)

606.31(W)×
344.2(H) ×
2.06(D) mm

Active Area (mm)

590.42 × 333.72 mm

Refresh Rate

240Hz

Display Colors

1.07B, 99% DCI-P3, Low Blue Light

Panel Type

AM-OLED, OLED (Full Module)

Connector Type

V-by-One 16 lanes, 163 pins 0.5mm Connector

Surface Treatment

Hard coating (2H), Antireflection

Operating Temp

0 ~
45 °C

Touchscreen Type

Without Touch Screen

Storage Temp

-20°C to 60°C

Work Mode

Normally Black

Pixel Format

Q-Square

Input Voltage (V)

10.5/20.7V (Typ.)(VDD/ELVDD)

Weight (g)

850 g

Designed For

Desktop Monitor | Gaming | 26.5-inch QHD QD-OLED gaming monitor integration subject to V-by-One, dual-rail power and HDR qualification

Product Details

Product Overview

QMC265FA01-D01 Q-Square QHD OLED Module is a 26.5-inch Samsung AM-OLED full module for desktop-monitor and gaming integration. The native image format is 2560(RGB)×1440 QHD at 16:9 with a Q-Square pixel layout and a 590.42 × 333.72 mm active area. The exact-model mechanical specification confirms a 2.06 mm module depth within a 606.31 × 344.2 mm outline, while panel mass is 850 g typical. The module is self-emissive, provides 250 cd/m² typical luminance, carries HDR400 feature wording, and is specified at 1,500,000:1 typical contrast.

The panel runs at 240 Hz with 0.1 ms typical gray-to-gray response time, 1.07B colors and 99% DCI-P3 wording. It is supplied without touch and uses a 16-lane V-by-One interface on a 163-pin 0.5 mm connector. The panel power rails are 10.5 V VDD and 20.7 V ELVDD typical. Exact-model documentation describes a self-emitting source with a 30K-hour reference and identifies QD-OLED as a feature. HDR400 is preserved as product wording; no claim of formal VESA DisplayHDR certification is made without model-specific certification evidence.

Three Core Buyer Value Propositions

1. Self-emissive QD-OLED architecture changes the optical and thermal integration model

Unlike an LCD module that depends on a separate LED backlight, this AM-OLED module generates image light at the panel. Samsung Display describes QD-OLED as a self-emissive architecture that combines OLED light generation with quantum-dot color conversion. For monitor engineers, that means there is no LCD backlight stack to size around panel transmissivity, while thermal behavior, drive electronics and image-content loading become important parts of system validation. Finished brightness and power should be measured in the target operating modes rather than inferred from an LCD-style backlight model.

2. 240 Hz, 0.1 ms G2G and 10-bit color define a premium gaming-monitor qualification envelope

The exact model combines QHD resolution, a 240 Hz frame rate, 0.1 ms typical G2G response and 1.07B colors. These are strong component-level requirements for a gaming-monitor design, but they do not guarantee end-to-end latency, frame rate or color accuracy. The scaler, source interface, frame processing, firmware and OLED drive behavior all contribute to the finished product. Qualification should treat panel response, refresh rate, source bandwidth and system latency as distinct measurements rather than compressing them into one marketing claim.

3. Sixteen V-by-One lanes and dual panel rails create a specific controller-design target

The panel-native interface is V-by-One with 16 lanes, using a 163-pin 0.5 mm connector and separate 10.5 V VDD / 20.7 V ELVDD typical rails. That is a materially different integration problem from an eDP or LVDS laptop panel. The controller board must generate the exact timing and native panel signaling, while power conversion and sequencing must satisfy both rails. An HDMI or DisplayPort input on the finished monitor belongs to the controller side and does not make those external interfaces native to the OLED module.

Key Specifications at a Glance

ParameterConfirmed value
Manufacturer / modelSamsung QMC265FA01-D01
Display size26.5 inch
Panel typeAM-OLED, OLED full module
Native resolution2560(RGB)×1440 QHD, 16:9
Pixel layoutQ-Square
Active area590.42 × 333.72 mm
Outline606.31 × 344.2 × 2.06 mm
Weight850 g typical
Brightness250 cd/m² typical; HDR400 feature wording
Contrast ratio1,500,000:1 typical
Viewing-angle values89/89/89/89 minimum at CR≥10000
Response time0.1 ms typical G2G
Colors1.07B, 99% DCI-P3, Low Blue Light
SurfaceHard coating 2H, antireflection
Refresh rate240 Hz
Native interfaceV-by-One, 16 lanes
Connector163 pins, 0.5 mm pitch
Panel input10.5 / 20.7 V typical, VDD / ELVDD
Emission / life referenceSelf-emitting, 30K hrs
TouchWithout touch screen
Operating / storage0 to 45 °C / -20 to 60 °C

What QD-OLED changes compared with an LCD monitor panel

Samsung Display describes QD-OLED as a self-emissive display in which OLED light interacts with quantum-dot material to produce color. Its QD-OLED technology overview provides useful manufacturer context for the architecture. That context is consistent with the exact model’s self-emitting description and QD-OLED feature wording, but it should not be used to assign later-generation features or certifications to QMC265FA01-D01.

For QMC265FA01-D01 Q-Square QHD OLED Module, the practical system implication is that black level, luminance, color and thermal behavior come from the emissive panel and its drive conditions rather than from an LCD cell plus separate backlight. Image-content distribution can influence OLED loading, so monitor validation should include both full-screen and windowed patterns, static and moving content, and representative user brightness settings. Any protection, compensation or image-retention management implemented by the finished monitor should be validated at system level.

HDR400 wording is not automatically a certification claim

The exact-model feature list includes HDR400, and the brightness field is 250 cd/m² typical. That combination should be reported carefully. A feature phrase in a component database is not sufficient evidence that a finished monitor or this exact panel has completed a formal VESA DisplayHDR certification process. HDR performance also involves peak-luminance behavior, black level, color, signal processing and test conditions beyond a single typical brightness number.

Procurement documents can preserve “HDR400 feature wording” as a model fact while requiring separate certification evidence when a program needs a formal logo or compliance statement. The finished monitor also needs source-side HDR signaling, tone mapping and firmware behavior. Measure representative HDR content and test the intended APL conditions rather than assuming the 250-nit typical value describes every HDR operating point.

V-by-One interface planning for a 16-lane OLED module

QMC265FA01-D01 Q-Square QHD OLED Module uses a 16-lane V-by-One panel interface rather than eDP, LVDS or a consumer external connector. The 163-pin 0.5 mm connector creates a dense cable and board-layout problem that should be addressed with the exact pin map, signal-integrity requirements and timing documentation. Controller selection should begin from the native QHD/240 Hz timing and the panel interface, then work outward to external inputs such as DisplayPort or HDMI.

Power design also needs both VDD and ELVDD rails at the documented 10.5 V and 20.7 V typical values. The finished board must sequence and regulate these rails according to the panel specification. Do not combine them into a single “monitor input voltage” field or substitute the external AC-adapter rating. Thermal checks should include the power-conversion components as well as the panel because the system must sustain 240 Hz operation under realistic gaming content.

240 Hz and 0.1 ms belong to different performance layers

A 240 Hz refresh rate defines how often the panel can present frames under its specified timing, while the 0.1 ms G2G value describes a panel pixel-transition measurement. Neither number alone determines total click-to-photon latency. The monitor scaler, frame buffers, source GPU, synchronization mode and firmware can add separate delay. Gaming qualification should therefore test full-system latency and frame pacing instead of presenting the panel response figure as the complete user experience.

At high refresh, cable integrity and controller timing should be stressed with long-duration patterns and repeated mode changes. If the finished monitor supports multiple refresh rates or adaptive synchronization, test each supported path. The component-level 240 Hz specification is strong evidence for a high-refresh monitor architecture, but it does not prove that an unqualified controller board can drive the exact panel or that every external source format maps correctly to the native module.

10-bit color and 99% DCI-P3: gamut is not calibration

The panel supports 1.07B colors and is documented at 99% DCI-P3. Those values are useful for a premium monitor specification because they define bit-depth and gamut targets. They do not establish Delta E, white point, gamma, uniformity or a factory-calibration process. A creator-oriented or color-managed monitor should define its own measurement limits and verify the complete display pipeline at representative brightness levels.

Low Blue Light appears in the exact-model feature set and should remain a bounded feature phrase unless a named certification is documented. The antireflection surface and 2H hard coating also influence the user-facing optical result. Test the complete front surface under intended ambient lighting, especially if a finished monitor adds protective film or another front layer that can change reflections and perceived black level.

Mechanical integration of a thin 26.5-inch OLED full module

The exact-model specification confirms a 2.06 mm module depth, with a 606.31 × 344.2 mm outline and 850 g typical mass. These figures are useful for bezel, rear-cover and support-frame planning. Thin modules still need controlled support because localized pressure, board flex or connector strain can damage the panel. Use the current mechanical drawing to define support zones, connector clearance and handling requirements instead of assuming another 26.5-inch QD-OLED shares the same details.

Incoming inspection should verify the exact QMC265FA01-D01 suffix, surface condition, connector integrity and outline before assembly. The panel is without touch; adding a touch sensor or cover layer changes thickness, optical reflection and thermal behavior and should be treated as a new system configuration. The 0 to 45 °C operating range is a component limit, not evidence of industrial-wide-temperature or rugged qualification.

Application fit: QHD gaming and premium desktop monitors

QMC265FA01-D01 Q-Square QHD OLED Module is documented for Desktop Monitor and Gaming applications. The strongest fit is a controller and enclosure designed specifically around the 26.5-inch QHD self-emissive module, 240 Hz timing, 16-lane V-by-One interface, dual power rails and 99% DCI-P3 wording. It can support gaming or premium desktop products whose system requirements align with these facts. No exact finished-monitor model compatibility, lifecycle guarantee or formal HDR certification is implied.

Because the module is self-emissive, monitor design should include OLED-specific thermal, static-image and brightness validation. The 30K-hour reference is a component life reference under its stated basis and should not be converted into a finished-monitor warranty. Procurement should also request current revision and change-status information when repeat purchasing matters; present production or stock information is not a guaranteed supply duration.

Procurement and validation checklist

  • Lock the complete Samsung QMC265FA01-D01 identity and reject unapproved OLED substitutions.
  • Validate native 2560×1440 timing at 240 Hz on the intended monitor controller.
  • Confirm the 16-lane V-by-One path, 163-pin 0.5 mm connector and exact pin assignment.
  • Design and sequence the 10.5 V VDD and 20.7 V ELVDD rails according to the panel specification.
  • Check the 606.31 × 344.2 × 2.06 mm outline and 850 g typical mass against the chassis.
  • Validate 250 cd/m² typical luminance, 99% DCI-P3, antireflection surface and black-level behavior in the finished monitor.
  • Treat HDR400 as feature wording unless model-specific certification evidence is supplied.
  • Measure total system latency separately from the 0.1 ms panel G2G value.
  • Confirm the no-touch architecture and request current revision/change-status information before volume procurement.

For qualification of QMC265FA01-D01, provide the controller architecture, V-by-One cable and pinout plan, power-rail design, chassis drawing, QHD/240 Hz timing target, color and HDR acceptance limits, thermal conditions and required quantity. Exact-model qualification should control the decision so that the OLED module, controller, power system and mechanical design are treated as one engineered display subsystem.

Recommended: Same Size

(26.5")

Alternatives

Applications & Value of LCD Panel

Engineering test diagram

FAQ

About QMC265FA01-D01 Q-Square QHD OLED Module

Does HDR400 mean QMC265FA01-D01 is formally VESA DisplayHDR 400 certified?

Not from the available exact-model evidence. HDR400 is preserved as documented feature wording, but no formal VESA DisplayHDR certification claim is made. Qualification should measure HDR signal handling, luminance behavior, black level, color and thermal performance on the finished monitor, with certification treated as a separate evidence requirement.

What interface does QMC265FA01-D01 use?

The module uses a 16-lane V-by-One interface through a 163-pin 0.5 mm connector. The power rails are 10.5 V typical VDD and 20.7 V typical ELVDD. A controller must match the exact Samsung timing, lane mapping, connector pinout and power sequencing; a generic V-by-One controller does not prove direct compatibility.

How should the 0.1 ms response time and 240 Hz refresh rate be interpreted?

The 0.1 ms G-to-G value is a panel transition specification and 240 Hz is the documented frame rate. They are relevant to gaming-monitor design but do not equal total system latency. Scaler processing, frame delivery, synchronization and firmware behavior remain separate contributors that should be measured on the completed monitor.

What does 99% DCI-P3 mean for QMC265FA01-D01?

The module is documented with 1.07B colors and 99% DCI-P3 wording. That supports wide-gamut qualification, but it does not guarantee a particular Delta E, white point or factory calibration target. Color-critical products should define measurable acceptance limits and validate the full electronics-to-panel pipeline.

Is QMC265FA01-D01 a self-emissive display module?

Yes. The product is documented as an AM-OLED full module and same-model context is consistent with Samsung QD-OLED monitor architecture. Its light-source field is self-emitting with a 30K-hour reference. That lifetime figure is a component reference, not a guarantee of finished-monitor service life or future supply duration.

What mechanical values should procurement verify for QMC265FA01-D01?

The confirmed module outline is 606.31 × 344.2 × 2.06 mm and typical mass is 850 g. Verify those values together with connector location, support zones and mounting details from the current drawing. The 26.5-inch diagonal and QHD resolution alone are not enough to prove fit with another OLED monitor platform.
Scroll to Top
Request Quote / Datasheet

Response within 12-24 hours. NDA available. Engineering support included.

Fields marked with an asterisk (*) are required.

Contact Information

Request Details

Download Datasheet

Please input your e-mail address to start the download.

WeChat QR code

Scan the QR code with your phone to contact us.