Freya Yang
+86 18318948097
+852 62667476
7 Inch USB Touch LCD Panel for Capacitive Industrial HMI
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS070WX61A-V1 + TP
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Touch Interface
Control Type
Weight (g)
Operating Environment
Motherboard Type
Designed For
7 Inch USB Touch LCD Panel for Industrial HMI
A 1280×800 SFT display combining a 40-pin LVDS image path with separate USB capacitive-touch control.
The 7 Inch USB Touch LCD Panel is designed for embedded operator interfaces that need a detailed landscape UI and a separate capacitive-touch input path. Its native 1280×800 resolution, 40-pin LVDS display interface and USB touch control support industrial HMI panels, automation terminals, instruments and smart equipment that use an external processor or controller board.
The LCD active area measures 149.76 × 93.60 mm, while the LCD-only outline is 161.0 × 107.0 × 3.35 mm typical. Successful integration requires the approved LVDS timing, pin assignment, power requirements, FPC orientation and touch-controller specification.
Key Specifications at a Glance
| Parameter | Confirmed value |
|---|---|
| Display size | 7.0 inch |
| Resolution | 1280 × 800 pixels |
| Panel technology | a-Si SFT TFT |
| Display mode | Normally black |
| Color depth | 16.7 million colors |
| LCD interface | 40-pin LVDS |
| Mating connector | Molex 54132-4062 |
| Touch configuration | Capacitive touch panel |
| Touch control | USB route |
| Active area | 149.76 × 93.60 mm |
| LCD outline | 161.0 × 107.0 × 3.35 mm typical |
| Pixel pitch | 0.117 × 0.117 mm |
| LCD weight | 120 g typical |
| Backlight | 21 LEDs |
| Operating temperature | −20°C to +70°C |
| Storage temperature | −30°C to +80°C |
| Driver components | 3 × ST5821C and 1 × ST5084C |
The production sample and controlled drawings should govern final electrical and mechanical approval.
1280×800 Landscape UI Performance
The native 1280×800 format provides a 16:10 landscape workspace for status graphics, menus, trend data, controls and detailed information.
UI layout planning
The pixel area can support:
- Equipment status dashboards
- Parameter and recipe screens
- Trend charts
- Alarm and event lists
- Touch navigation
- Service and diagnostic pages
- Camera or process images
- Multi-column operating screens
Graphics should be designed at the native resolution where practical. Scaling from a different aspect ratio may reduce clarity or create unused borders.
SFT normally-black behavior
The panel is identified as SFT with a normally-black display mode. This supports high-information interfaces that use dark backgrounds and illuminated graphical elements.
SFT terminology does not by itself establish a particular numerical viewing angle, luminance or contrast ratio. Those values should be assessed on the approved sample.
40-Pin LVDS Host Qualification
The display uses a 40-pin LVDS connection. The host must generate the correct native timing, differential-lane arrangement, color format, control signals and power conditions.
A matching 40-pin connector does not guarantee LVDS compatibility.
Electrical checks before PCB release
Confirm:
- Native 1280×800 timing
- LVDS channel and bit-depth mode
- Clock-pair assignment
- Data-pair order and polarity
- Complete 40-pin mapping
- Logic and panel supply requirements
- Backlight connections
- FPC contact side
- Pin-1 orientation
- Connector mating height
- Required control signals
The identified mating connector is Molex 54132-4062, but the complete signal map still governs compatibility.
Non-LVDS hosts require conversion
HDMI, MIPI DSI, eDP, USB video and parallel RGB hosts cannot drive the panel directly unless a suitable controller converts the signal into the required LVDS format.
A controller board should be selected from the full timing and electrical specification, not only from screen size and resolution.
USB Touch and LVDS Display Are Separate Paths
The 7 Inch USB Touch LCD Panel uses LVDS for image data and a separate control route for capacitive touch.
USB touch support does not make USB the LCD video interface.
Touch-controller requirements
The touch assembly must be qualified for:
- Approved controller IC
- USB device implementation
- Host operating voltage
- Touch orientation
- Coordinate mapping
- Reset or interrupt requirements
- Touch FPC routing
- Required touch-point count
- Firmware and host-driver support
The touch drawing also references alternative interface routes on a controller board. Those alternatives should not be treated as standard production interfaces unless the selected assembly confirms them.
Cover and sensor integration
The touch drawing identifies a 0.70 mm tempered cover lens and a separate sensor structure. The complete touch outline, viewing area, border and FPC exit must be checked against the finished enclosure.
Capacitive touch alone does not confirm glove use, water rejection, optical bonding or operating-system compatibility.
Mechanical Integration and Enclosure Fit
The LCD active area is 149.76 × 93.60 mm. The LCD-only outline is 161.0 × 107.0 × 3.35 mm typical.
LCD dimensions versus finished assembly
The 3.35 mm figure applies to the LCD structure, not necessarily the finished LCD-plus-touch stack. Cover glass, sensor, adhesive, controller board, mounting tape and enclosure components increase the complete assembly thickness.
Enclosure-opening review
Check:
- LCD outline
- Active image area
- Touch viewing area
- Cover-lens outline
- Bezel overlap
- FPC bend radius
- Touch-controller board clearance
- Connector insertion space
- Mounting tolerances
- Cable exit direction
The complete approved LCD-plus-touch drawing should determine tooling and enclosure release.
Backlight and Environmental Qualification
The LCD includes 21 LEDs and is specified for operation from −20°C to +70°C, with storage from −30°C to +80°C.
Backlight-driver review
LED count alone does not establish the required driver topology, dimming method, lifetime or maximum luminance. The approved backlight voltage, current and control method must be matched by the system design.
Application environment
The available product data does not establish sunlight readability, waterproofing, optical bonding or environmental certification. Readability should be evaluated with the intended cover glass, touch sensor, ambient light and UI design.
Recommended Applications
This configuration can be evaluated for:
- Industrial HMI panels
- Automation controllers
- Test and measurement instruments
- Smart equipment terminals
- Service and diagnostic interfaces
- Equipment dashboards
- Embedded operator stations
- Building-control panels
A different configuration may be preferable when the host has no LVDS output, the project requires a complete HDMI monitor, higher verified luminance, a different temperature range or a touch interface other than the approved USB route.
Customization and Project Review
Project evaluation may include:
- LCD FPC and pin definition
- LVDS timing adaptation
- Connector and cable review
- Capacitive-touch assembly
- USB touch-controller selection
- Cover-lens dimensions
- Touch border and printing
- Mechanical adjustment
- Backlight target
- Controller-board matching
- Packaging and branding
Custom configurations are generally reviewed from 1,000 pieces, subject to tooling requirements, material availability and the requested specification. Sample and standard-module quantities are confirmed separately.
Procurement Checklist
Before sample approval, confirm:
- Native 1280×800 timing
- LVDS channel and color-depth mode
- Complete 40-pin pinout
- Clock and data-pair polarity
- Molex 54132-4062 mating compatibility
- Panel and logic supply requirements
- Backlight-driver requirements
- LCD FPC contact side and orientation
- USB touch-controller identity
- Touch host and driver requirements
- Touch orientation and coordinate mapping
- Required touch-point count
- Active area: 149.76 × 93.60 mm
- LCD outline: 161.0 × 107.0 × 3.35 mm typical
- Complete touch and cover dimensions
- Enclosure opening and cable clearance
- Operating temperature: −20°C to +70°C
- Storage temperature: −30°C to +80°C
- Sample quantity and annual demand
- Controller-board need and production timing
FAQ
About 7 Inch USB Touch LCD Panel
What is the typical lead time for custom display modules with specific interface requirements?
Lead time for custom display modules depends on the specific interface requirements and current production schedule. For the HS070WX61A-V1 + TP, which uses a standard 40-pin LVDS interface, typical lead times are based on order volume and customization complexity. We recommend contacting our sales team with your exact interface specifications and quantity to receive a confirmed lead time estimate.
What are the operating temperature ranges for your industrial LCD panels, especially for extended outdoor use?
The HS070WX61A-V1 + TP operates from -20°C to +70°C and stores from -30°C to +80°C. For extended outdoor use requiring wider temperature ranges, please confirm with our engineering team whether a wide-temp variant is available. We can discuss options such as heater-integrated or extended-temperature-grade components to meet your application needs.
What are the common interface options (e.g., LVDS, eDP, MIPI) for your industrial TFT displays, and what are their pin counts?
The 7 Inch USB Touch LCD Panel (model HS070WX61A-V1 + TP) uses a 40-pin LVDS interface for the display image path. LVDS is a common choice for industrial TFT displays due to its low EMI and long cable reach. For this specific model, only the 40-pin LVDS interface is confirmed.
Can you integrate touch controllers (resistive/capacitive) into custom display modules with specific firmware requirements?
Yes, the HS070WX61A-V1 + TP integrates a separate USB capacitive-touch controller. For custom firmware requirements, we can work with your team to ensure the touch controller firmware matches your system. Please share your specific firmware needs and controller specifications so our engineering team can evaluate compatibility and provide a tailored solution.
What are the packaging options for shipping and handling of fragile LCD panels?
Fragile LCD panels like the HS070WX61A-V1 + TP are typically packaged in anti-static bags with foam cushioning inside sturdy cartons. For custom packaging, we can design trays or boxes that secure the panel and prevent movement during transit. Please specify your shipping volume and handling requirements so we can propose an appropriate packaging solution.
Can you provide a custom LCD panel with specific dimensions and a round shape?
The HS070WX61A-V1 + TP is a standard rectangular 7.0-inch panel. Custom shapes, such as round displays, require a completely new design and tooling. We can evaluate your specific dimension and shape requirements; please provide a mechanical drawing and target volume so our engineering team can assess feasibility and development timeline.
What is the operating and storage temperature range, and are wide-temp options available (e.g., -30~85, -40~85°C)?
The HS070WX61A-V1 + TP operates from -20°C to +70°C and stores from -30°C to +80°C. Wide-temp options like -30~85°C or -40~85°C are For extended temperature requirements, please contact our engineering team to discuss possible customizations or alternative models that can meet your specified range.
Can you customize the mechanical dimensions and mounting holes for a specific industrial enclosure?
Yes, we can customize mechanical dimensions and mounting holes for the HS070WX61A-V1 + TP to fit your specific industrial enclosure. Please provide a detailed mechanical drawing or CAD file with your required mounting points and tolerances. Our engineering team will review the feasibility and provide a custom design that maintains display performance and reliability.
What are the key durability and reliability differences between your standard TFT displays and your sunlight readable models for outdoor industrial use?
The product page for the 7 Inch USB Touch LCD Panel does not specify a sunlight readable variant or provide brightness or contrast values. Durability differences may include wider operating temperature ranges and enhanced mechanical robustness. For exact specifications and availability of sunlight readable versions, please confirm on request.
What is the minimum order quantity (MOQ) for custom TFT displays with specific touch screen integration?
The minimum order quantity (MOQ) for custom TFT displays with touch integration depends on the complexity of customization and production setup. For the HS070WX61A-V1 + TP, standard MOQ may be lower for existing designs. Please provide your target quantity and customization details so we can give you a precise MOQ and pricing.
Freya Yang
+86 18318948097
