LCD Panel Inventory -Advanced Search

~

~

~

~

~

~

MG215HB07-1 LVDS sRGB Monitor Display Module WLED 21.5in CSOT

Product Gallery
Key Specs

Model P/N

MG215HB07-1

Size

21.5″

Resolution

1920×1080

Brightness

250 cd/m² (Typ.)

Viewing Angle

89/89/89/89 (Typ.)(CR≥10)

Connector Type

LVDS (2 ch, 8-bit), 30 pins 1.0mm Connector

Operating Temp

0 ~
50 °C

Overall(mm)

484.464(W)×
284.486(H)×
12(D)
Upgrade Options (OEM/ODM)

csot

MG215HB07-1

LCD Panel Specifications

Brand

CSOT

Panel Size (inch)

21.5"

Model P/N

MG215HB07-1

Resolution

1920×1080

Brightness (nits)

250 cd/m² (Typ.)

Viewing Angle

89/89/89/89 (Typ.)(CR≥10)

Contrast Ratio

1300:1 (Typ.) (TM)

Response Time

14 ms (Typ.)(G to G)

Overall (mm)

484.464(W)×
284.486(H) ×
12(D) mm

Active Area (mm)

476.064 × 267.786 mm

Refresh Rate

100Hz

Display Colors

16.7M, 99% sRGB, Low Blue Light

Panel Type

a-Si TFT-LCD, LCM

Connector Type

LVDS (2 ch, 8-bit), 30 pins 1.0mm Connector

Surface Treatment

Antiglare (Haze 25%), Hard coating (3H)

Operating Temp

0 ~
50 °C

Touchscreen Type

Without Touch Screen

Storage Temp

-20°C to 60°C

Work Mode

IPS, Normally Black, Transmissive

Pixel Format

RGB Vertical Stripe

Input Voltage (V)

5

Weight (g)

1840 g

Designed For

Desktop Monitor / FHD 100 Hz Monitor Integration (exact LVDS timing, external WLED driver, optics, power, and mechanical validation required)

Product Details

MG215HB07-1 LVDS sRGB Monitor Display Module is a 21.5-inch CSOT a-Si TFT-LCD LCM for desktop-monitor integration, combining a native 1920×1080 FHD image, 250 cd/m² typical luminance, 100 Hz refresh and 99% sRGB color coverage. The exact-model specification uses IPS, Normally Black, Transmissive operation with 89/89/89/89 degree viewing angles and a 1300:1 typical contrast ratio. Its active area is 476.064 × 267.786 mm inside a 484.464 × 284.486 × 12 mm module outline, with a typical mass of 1.84 kg. Native video is dual-channel 8-bit LVDS through a 30-pin 1.0 mm connector at a 5.0 V typical panel supply.

The module includes a four-string WLED backlight with a 30K-hour life reference, but the backlight is specified without an integrated LED driver. That distinction is central to system design: the monitor electronics must provide a compatible external backlight driver and dimming path. The panel's 9.58 W typical power-consumption entry is a useful component reference, but it should not be treated as total finished-monitor consumption because the scaler, backlight driver, power conversion, USB functions and other electronics add their own loads.

Product architecture for 100 Hz FHD monitor designs

The 1920×1080 image uses an RGB vertical-stripe pixel arrangement. At 21.5 inches, this is a conventional desktop-monitor geometry, while the 100 Hz refresh gives a higher motion target than a basic 60 or 75 Hz office display. The exact application is Desktop Monitor; the current evidence does not explicitly label this model for gaming, so Designed For wording remains centered on desktop-monitor integration rather than broadening the product beyond documented use.

The surface uses antiglare treatment with 25% haze and a 3H hard coating. Those characteristics are relevant to office and general desktop environments where reflections and durability matter, but they do not establish sunlight readability or outdoor suitability. Low Blue Light is listed alongside 16.7 million colors and 99% sRGB. Any formal eye-care, color-accuracy or regulatory claim must be supported by separate finished-product evidence.

Three Core Buyer Value Propositions

1. 100 Hz FHD provides a smoother desktop timing target without changing native resolution

The 100 Hz native refresh offers a defined higher-frequency mode for desktop interfaces, scrolling and motion content while preserving the familiar FHD pixel format. This gives the scaler and source architecture a concrete timing requirement. The panel capability alone does not guarantee that every external input or graphics source will expose 100 Hz; the monitor controller, EDID, firmware and input bandwidth must be configured and tested for the intended mode.

2. 99% sRGB and IPS wide viewing support general-purpose monitor image quality

The exact model specifies 99% sRGB, 16.7 million colors, 1300:1 typical contrast and wide 89-degree viewing angles. These facts support office, productivity and general desktop-display evaluation where consistent off-axis viewing and an sRGB-oriented gamut are useful. They do not guarantee factory calibration, professional color tolerances or HDR behavior, so the finished monitor should be measured against its own acceptance criteria.

3. Defined LVDS plus external WLED driving makes system responsibilities clear

Dual-channel 8-bit LVDS, a 30-pin 1.0 mm connector and 5.0 V panel supply establish the native display link. Separately, the four-string WLED backlight is explicitly listed without a driver. This separation helps procurement and engineering avoid a common integration mistake: the monitor needs both a compatible LVDS controller path and a properly specified LED driver/dimming circuit.

Key Specifications at a Glance

SpecificationMG215HB07-1 value
Display size21.5 inch
Panel typea-Si TFT-LCD, LCM
Resolution1920(RGB)×1080, FHD, 16:9
Active area476.064 × 267.786 mm
Outline484.464 × 284.486 × 12 mm
Weight1.84 kg (Typ.)
Brightness250 cd/m² (Typ.)
Contrast1300:1 (Typ.)
Viewing angle89/89/89/89 (Typ.)(CR≥10)
Response14 ms (Typ.)(G to G)
Color16.7M, 99% sRGB, Low Blue Light
Refresh100 Hz
InterfaceLVDS, 2 ch, 8-bit, 30-pin 1.0 mm
Panel supply5.0 V (Typ.)
Backlight4-string WLED, 30K hrs, no driver
Operating / storage0 to 50°C / -20 to 60°C

LVDS controller integration and 100 Hz validation

MG215HB07-1 LVDS sRGB Monitor Display Module should be driven with the exact native timing through its dual-channel 8-bit LVDS link. A generic FHD LVDS output is only a starting point. The controller board must support the 100 Hz timing, correct bit mapping, clock behavior and 30-pin pinout specified for the panel. Connector orientation and cable routing also matter because an electrically similar cable can still be mechanically reversed or mapped for a different panel family.

Bring-up should include cold boot, input switching, repeated power cycles, sleep/wake and sustained 100 Hz content. The monitor's external HDMI or DisplayPort inputs, if used, must feed a scaler capable of generating the required internal LVDS timing. EDID and firmware should expose supported modes without advertising an unsupported combination. Stable image output at one refresh rate does not prove that the complete 100 Hz path has been qualified.

External backlight-driver requirements

The panel includes four WLED strings and lists a 30K-hour backlight-life reference, but no LED driver is integrated. The system must therefore include a driver architecture sized for the exact LED current, voltage, dimming method and protection requirements documented for this model. The 5.0 V panel supply is for the LCD electronics and should not be assumed to be the complete LED-string supply.

Prototype qualification should measure brightness range, dimming stability, flicker behavior, startup and shutdown sequencing, and thermal conditions at sustained luminance. A 250 cd/m² typical panel target should be confirmed on the finished assembly using the intended driver and optical system. The 30K-hour backlight specification is a component reference under defined conditions and should not be promoted into a complete monitor service-life warranty.

Optical quality and antiglare surface

The IPS normally-black transmissive mode provides wide viewing angles, while 1300:1 typical contrast supports a conventional desktop viewing profile. The antiglare surface with 25% haze can reduce mirror-like reflections, although room lighting and screen angle still influence perceived glare. The surface treatment does not make the product an outdoor display, and the 250 cd/m² luminance should not be converted into a sunlight-readable claim.

Color capability is listed as 16.7 million colors with 99% sRGB. For a general-purpose desktop monitor, that is a useful gamut baseline. If the finished product requires calibrated color, the manufacturer should define white point, gamma, grayscale and gamut tolerances and test those parameters after the scaler, backlight and final enclosure are assembled. Low Blue Light wording should remain a feature descriptor unless a specific certification is separately documented.

Mechanical fit and chassis planning

The 484.464 × 284.486 × 12 mm module outline and 1.84 kg typical weight are relevant to monitor chassis, rear cover and stand design. The active image area is 476.064 × 267.786 mm. Bezel opening, mounting points, connector clearance and cable bend space should be taken from the exact drawing, not derived only from the active area. A 21.5-inch FHD panel from another supplier can have a similar image size but different rear mechanics.

During sample assembly, check for frame pressure, panel twist and cable strain. Surface inspection should include scratches, pressure marks and coating damage before the module is mounted. If a supplier proposes a substitute model, the new part should be compared electrically and mechanically rather than approved solely because the diagonal, resolution and LVDS label appear similar.

Power and thermal planning

The exact record lists 9.58 W typical power consumption for the panel configuration. That figure is useful for estimating component-level thermal load but does not represent the complete monitor. The external LED driver, scaler, DC/DC conversion, audio, USB hub and other features add consumption. Power architecture should therefore be sized from the full system budget, with the panel entry retained as one documented input.

Operation is specified from 0 to 50°C and storage from -20 to 60°C. These are panel-level limits, not proof of rugged or industrial qualification. A desktop enclosure should be evaluated at sustained brightness and 100 Hz content to make sure internal air and panel temperatures remain within specification. Thermal testing should include the chosen backlight driver because driver losses also contribute to enclosure heat.

Application fit: desktop-monitor integration

Desktop Monitor is the documented application. That supports office, productivity and general FHD monitor projects requiring a 100 Hz panel and an sRGB-oriented image target. The evidence does not explicitly document Gaming as an application for this exact suffix, so the production Designed For field remains desktop-monitor focused even though a 100 Hz refresh may also be attractive for smoother motion.

MG215HB07-1 LVDS sRGB Monitor Display Module is a complete LCM rather than a backlightless CELL, but the external LED-driver requirement means the monitor electronics still own an important part of the illumination system. This combination can be suitable for OEM designs where the controller and power board are developed around the panel's LVDS and WLED requirements. Exact board compatibility must be demonstrated, not assumed from signal-family names.

Procurement and incoming-quality checklist

Confirm MG215HB07-1 identity on the incoming label and compare the outline, active area and mass with the approved mechanical drawing. Check the 30-pin 1.0 mm connector, no-touch configuration and four-string WLED arrangement. Functional testing should prove native FHD 100 Hz operation, brightness control, stable LVDS signaling and normal power-state transitions using the production controller and backlight driver.

Optical inspection should cover uniformity, antiglare surface condition, brightness, contrast and representative color patterns. Keep the controller firmware, LVDS cable, LED-driver revision and approved panel sample linked in the qualification record. MG215HB07-1 LVDS sRGB Monitor Display Module should enter volume purchasing only after these system-level checks pass; current stock, lead time and lifecycle require separate supplier confirmation.

Engineering summary

MG215HB07-1 LVDS sRGB Monitor Display Module combines a 21.5-inch FHD IPS image, 250 cd/m² typical luminance, 99% sRGB, 100 Hz refresh and dual-channel 8-bit LVDS in a CSOT desktop-monitor LCM. The module includes a four-string WLED backlight but requires an external LED driver. Its safest integration path is to qualify the exact LVDS timing, backlight driver, mechanics, optics and thermal behavior together before production release.

Applications & Value of LCD Panel

Engineering test diagram

FAQ

About MG215HB07-1 100Hz LVDS Monitor Module

What native interface does MG215HB07-1 use?

The panel uses dual-channel 8-bit LVDS through a 30-pin 1.0 mm connector with a 5.0 V typical panel supply. This is the internal panel interface, not a consumer HDMI or DisplayPort input. A monitor scaler must generate the exact FHD 100 Hz timing and correct LVDS mapping. Confirm the pin assignment, cable orientation and power sequence from the current exact-model documentation before controller-board release.

Does MG215HB07-1 include a backlight driver?

No. The module includes a four-string WLED backlight but is specified without an integrated LED driver. The monitor electronics must provide a compatible driver and dimming circuit based on the exact LED electrical requirements. Do not treat the 5.0 V LCD-panel supply as a complete backlight supply specification. Validate brightness range, startup, dimming stability, protection and thermal behavior using the intended production driver.

Can MG215HB07-1 operate at 100 Hz?

The exact model is specified with a 100 Hz refresh rate at native 1920×1080 resolution. The finished monitor still needs a scaler, firmware, EDID configuration and external input path that can sustain the intended mode. Test cold boot, input switching, sleep/wake and sustained 100 Hz content on the production controller. A panel refresh specification alone does not guarantee that every connected source will expose 100 Hz.

Which optical specifications are confirmed for MG215HB07-1?

Confirmed values include 250 cd/m² typical luminance, 1300:1 typical contrast, 89/89/89/89 typical viewing angles, 14 ms typical gray-to-gray response and 16.7 million colors with 99% sRGB. The surface is antiglare with 25% haze and 3H hard coating, and Low Blue Light is listed. These panel-level facts do not establish HDR, sunlight readability or a specific finished-monitor calibration tolerance.

What are the mechanical dimensions and weight of MG215HB07-1?

The exact module outline is 484.464 × 284.486 × 12 mm, with an active area of 476.064 × 267.786 mm and typical mass of 1.84 kg. Use the current drawing to confirm mounting points, connector clearance and cable routing because active area alone does not define chassis fit. Sample assembly should also check frame pressure, panel twist and the antiglare surface for handling damage.

What applications are documented for MG215HB07-1?

Desktop Monitor is the documented application. The FHD image, 100 Hz refresh, IPS wide viewing angles and 99% sRGB support evaluation for general desktop-monitor projects. The exact evidence does not explicitly document Gaming as an application for this suffix, so the production Designed For field remains monitor focused. Any named retail-monitor replacement or controller compatibility claim still requires exact service or system evidence.
Scroll to Top
Request Quote / Datasheet

Response within 12-24 hours. NDA available. Engineering support included.

Fields marked with an asterisk (*) are required.

Contact Information

Request Details

Download Datasheet

Please input your e-mail address to start the download.

WeChat QR code

Scan the QR code with your phone to contact us.