LCD Panel Inventory -Advanced Search

~

~

~

~

~

~

HJ140BB-01A 15:10 30-Pin Glossy Display Innolux

Product Gallery
Key Specs

Model P/N

HJ140BB-01A

Size

14″

Resolution

2160×1440

Brightness

330 cd/m² (Typ.)

Viewing Angle

85/85/85/85 (Typ.)(CR≥10)

Connector Type

eDP (4 Lanes), eDP1.4, 30 pins Connector

Operating Temp

-10 ~
50 °C

Overall(mm)

301.51(W)×
208.61(H)×
2.75(D)
Upgrade Options (OEM/ODM)

innolux

HJ140BB-01A

LCD Panel Specifications

Brand

Innolux

Panel Size (inch)

14"

Model P/N

HJ140BB-01A

Resolution

2160×1440

Brightness (nits)

330 cd/m² (Typ.)

Viewing Angle

85/85/85/85 (Typ.)(CR≥10)

Contrast Ratio

1500:1 (Typ.) (TM)

Response Time

30 (Typ.)(Tr+Td) ms

Overall (mm)

301.51(W)×
208.61(H) ×
2.75(D) mm

Active Area (mm)

295.812 × 197.208 mm

Refresh Rate

60Hz

Display Colors

16.7M, 71% NTSC

Panel Type

a-Si TFT-LCD, LCM

Connector Type

eDP (4 Lanes), eDP1.4, 30 pins Connector

Surface Treatment

Glare (Haze 0%), Hard coating (3H)

Operating Temp

-10 ~
50 °C

Touchscreen Type

Without Touch Screen

Storage Temp

-20°C to 60°C

Work Mode

IPS, Normally Black, Transmissive

Pixel Format

RGB Vertical Stripe

Input Voltage (V)

3.3

Vibration Resistance

1.5G (14.7 m/s²)

Weight (g)

288 g

Designed For

Laptop / Notebook Display Integration and Replacement Qualification (exact 30-pin eDP, backlight-driver, timing, cable and mechanical validation required)

Product Details

HJ140BB-01A 15:10 30-Pin Glossy Display is a 14.0-inch Innolux a-Si TFT-LCD module for laptop integration, combining a 2160×1440 native image in a 15:10 format with a glossy 0% haze surface and 330 cd/m² typical luminance. The exact-model data lists 1500:1 typical contrast, 85/85/85/85 viewing angles, 16.7 million colors and 60 Hz refresh. Its active area is 295.812 × 197.208 mm within a 301.51 × 208.61 × 2.75 mm outline, with a maximum mass of 288 g. The panel uses four-lane eDP 1.4 through a 30-pin connector and a 3.3 V typical supply, while its 11S6P WLED backlight is supplied without a driver.

Why the 2160×1440 15:10 format matters in a notebook

The native resolution gives the panel a taller image shape than conventional 16:9 notebook screens. That can provide additional vertical workspace for documents, web content and productivity interfaces while retaining a compact 14-inch footprint. The 295.812 × 197.208 mm active area defines the exact visible image geometry. Software scaling and application layout remain system-level concerns; the panel establishes the pixel matrix and aspect ratio rather than guaranteeing a specific user-interface experience.

The module is documented for Laptop use. That supports notebook new-design and exact-part replacement evaluation, but not universal compatibility with every 14-inch 2160×1440 machine. Different notebook products can use distinct connectors, cable positions, timing, firmware and lid mechanics even when resolution and diagonal appear identical.

Three Core Buyer Value Propositions

1. 2160×1440 delivers a high-density 15:10 notebook workspace

The 2160×1440 matrix is the primary differentiation of this model. It provides more native pixels than common FHD laptop panels and uses a 15:10 image ratio that can be useful for productivity-oriented notebooks. For procurement, the resolution is also a compatibility checkpoint: replacing the panel with a different native format may require different graphics timing, scaling and bezel geometry.

2. 1500:1 contrast and glossy surface target image clarity rather than matte reflection control

The panel lists 1500:1 typical contrast and a glare surface with 0% haze and 3H hard coating. A glossy front surface can preserve crisp image appearance but also reflects ambient light more directly than an antiglare finish. The correct choice depends on the notebook product concept. Buyers should not substitute a matte panel solely because size and resolution match without considering the intended optical behavior and any front cover used by the notebook.

3. Four-lane eDP 1.4 and a 30-pin connector define the internal signal path

The exact interface is eDP with four lanes, eDP 1.4 and a 30-pin connector. That combination is important because many laptop panels use 30-pin or 40-pin eDP arrangements that are not interchangeable. Connector count alone is still not sufficient: pin assignment, location, cable length, timing and power sequence must match the exact notebook design.

Key Specifications at a Glance

SpecificationHJ140BB-01A value
Display size14.0 inch
Panel typea-Si TFT-LCD, LCM
Resolution2160×1440, 15:10
Active area295.812 × 197.208 mm
Outline301.51 × 208.61 × 2.75 mm
Weight288 g maximum
Brightness330 cd/m² typical
Contrast1500:1 typical
Viewing angle85/85/85/85 typical at CR≥10
Response30 ms typical Tr+Td
Colors16.7M, 71% NTSC
Refresh rate60 Hz
InterfaceeDP 4 lanes, eDP1.4, 30-pin connector
Supply3.3 V typical
Backlight11S6P WLED, no driver
Operating / storage-10 to 50°C / -20 to 60°C

Glossy optical behavior should be assessed with the final lid and cover

The source explicitly identifies a glare surface with 0% haze. That is an optical characteristic, not a statement that the finished notebook has no reflections. Ambient light, optional cover glass and screen angle can all affect perceived glare. A glossy panel can support a clear, high-contrast appearance indoors, while bright windows or overhead lights may create stronger mirror-like reflections than a matte surface.

HJ140BB-01A 15:10 30-Pin Glossy Display should be evaluated in the intended lid stack. If the notebook uses an additional protective cover, measure the combined reflectance and luminance because extra layers can change both. The 330-nit panel value does not establish sunlight readability, and the page does not make that claim.

Backlight-driver design remains a notebook responsibility

The exact model uses an 11S6P WLED backlight and is specified without a driver. That means the system must provide a compatible LED driver, current control and brightness-dimming method separate from the 3.3 V panel logic supply. The display interface and backlight power path should not be treated as the same electrical function.

The source does not provide a backlight-life figure for the current record. That field remains blank rather than inheriting a value from another HJ140BB revision. If service-life planning is important, obtain the exact Innolux backlight specification and evaluate it against the notebook's brightness profile and thermal design.

eDP replacement qualification

For replacement work, match HJ140BB-01A on the original label wherever possible. Verify the 30-pin eDP connector, four-lane architecture, connector location and native 2160×1440 timing. A 30-pin FHD panel may not meet the bandwidth or timing needs of this higher-resolution display, and a mechanically similar 40-pin panel is not an electrical equivalent.

Bring-up tests should include cold boot, operating-system login, brightness control, sleep/wake and repeated lid-close cycles. Check for image corruption, blank resume events and cable sensitivity around the hinge. The approved cable and panel revision should be recorded together for production control.

Mechanical packaging in a thin 14-inch lid

The 301.51 × 208.61 × 2.75 mm outline places the panel in a slim notebook form factor. The active area is 295.812 × 197.208 mm and the maximum mass is 288 g. Lid design should verify bezel overlap, connector clearance and support pressure using the exact drawing. Even small dimensional differences can matter in thin enclosures where the battery, antenna, webcam or cable routing may be tightly packed.

Prototype lids should be checked for pressure marks and image changes under normal opening, closing and handling. The component's 1.5G vibration reference can support screening, but it does not establish rugged-notebook qualification or a specific transport standard.

Image quality boundaries: color, contrast and response

The panel provides 16.7 million colors with a 71% NTSC reference and 1500:1 typical contrast. Those figures are useful for general notebook image evaluation but do not prove calibrated sRGB coverage or color-critical performance. The graphics pipeline, backlight spectrum and any operating-system color profile influence the completed notebook result.

The response-time entry is 30 ms typical Tr+Td. That makes this panel different from a gaming-focused high-refresh display; the documented application is Laptop, and refresh is 60 Hz. Use actual scrolling, video and UI tests on the target notebook if motion behavior is an acceptance criterion.

Temperature and notebook thermal design

The exact operating range is -10 to 50°C and storage is -20 to 60°C. These values are component limits. Notebook internal temperature can be influenced by battery charging, processor load and lid construction, so system validation should measure conditions near the panel rather than relying only on room ambient.

Cold-start evaluation is particularly relevant because the lower operating limit is below standard office conditions. Verify image startup, backlight behavior and response at the temperature points required by the notebook program. Do not infer automotive, industrial or military qualification from the temperature range.

Application fit: notebook display integration

Laptop is the documented application. The 14-inch high-resolution 15:10 format can support productivity-oriented notebook designs when the eDP interface, backlight driver and mechanical envelope match. The evidence does not identify a specific laptop manufacturer or model, so exact fit claims remain outside scope.

For new designs, verify panel timing, backlight control and mechanical integration before tooling the lid. For replacement sourcing, compare the installed label and cable. Similar visual appearance is not enough to establish interchangeability.

Procurement and incoming-quality checklist

Confirm HJ140BB-01A and revision identity on incoming units. Inspect the glossy surface, 30-pin connector and thin mechanical profile against the approved sample. Power the panel through the intended notebook electronics and verify native resolution, brightness control and sleep/wake behavior before lot acceptance.

HJ140BB-01A 15:10 30-Pin Glossy Display should move to volume procurement only after the target notebook has passed electrical, optical and mechanical qualification. Keep photos of the accepted label, connector and rear layout with the BOM record. Stock, MOQ, lead time, price and lifecycle status should be confirmed separately because they are not implied by the technical specification.

Sample approval should include both optical and lid-assembly checks

Before a notebook program freezes this panel, inspect more than a powered image. Compare the glossy surface under the product's intended ambient lighting, check the visible area against the bezel, cycle the lid repeatedly and watch the eDP cable at the hinge, then repeat brightness and sleep/wake tests after the assembly has warmed. These checks connect the panel specification to the real notebook environment. Store the approved sample configuration so later incoming lots can be judged against the same electrical, mechanical and optical reference instead of a generic 14-inch screen description.

Engineering summary

HJ140BB-01A 15:10 30-Pin Glossy Display is a 14-inch 2160×1440 IPS notebook module with 330-nit luminance, a glossy 0% haze surface, 1500:1 typical contrast, four-lane eDP 1.4 and a 30-pin connector. Its 11S6P WLED backlight requires an external driver. The most important integration controls are exact connector/timing matching, lid mechanics and optical-stack validation, especially when replacing another panel that shares only the same diagonal or resolution.

Applications & Value of LCD Panel

Engineering test diagram

FAQ

About HJ140BB-01A 15:10 30-Pin Glossy Display

What must match when replacing HJ140BB-01A?

Replacement work should match the exact panel identity, 2160×1440 native timing, four-lane eDP 1.4 path and 30-pin connector, plus the 301.51 × 208.61 × 2.75 mm outline. Same 14-inch size or resolution is not enough. Verify connector location, cable routing, brightness control and lid mechanics against the original notebook before approval.

How does the glossy surface affect notebook integration?

The panel uses a glare surface with 0% haze and 3H hard coating. That can preserve a crisp image but can reflect bright windows or overhead lighting more directly than a matte panel. Test the finished lid and any cover layer under the notebook's intended ambient conditions; the 330 cd/m² panel brightness does not establish sunlight-readable performance.

Does HJ140BB-01A include a backlight driver?

No. The module uses an 11S6P WLED backlight without a driver, while the LCD logic supply is 3.3 V typical. The notebook must provide a compatible LED-driving and dimming solution separately from the eDP signal path. The current evidence does not provide a backlight-life value, so that field should remain blank rather than using another revision's figure.

What image-quality values are confirmed?

The exact model lists 330 cd/m² typical luminance, 1500:1 typical contrast, 85/85/85/85 typical viewing angles and 16.7M colors with a 71% NTSC reference. These values are useful for notebook screening but do not establish calibrated sRGB coverage. Evaluate the complete graphics and backlight system if formal color accuracy is required.

What operating temperature range applies?

The panel is specified for operation from -10 to 50°C and storage from -20 to 60°C. These are component boundaries rather than industrial or automotive qualifications. For a notebook program, check panel temperature during battery charging and sustained processor load, and verify cold-start image and backlight behavior at the temperatures required by the product.

Why is the 15:10 aspect ratio relevant?

The native 2160×1440 image uses a 15:10 format, providing a taller workspace than a conventional 16:9 laptop screen. That affects visible-area geometry, software scaling and bezel design. A replacement with a different aspect ratio can change fit or timing even if the diagonal is close, so the 295.812 × 197.208 mm active area should be checked.
Scroll to Top
Request Quote / Datasheet

Response within 12-24 hours. NDA available. Engineering support included.

Fields marked with an asterisk (*) are required.

Contact Information

Request Details

Download Datasheet

Please input your e-mail address to start the download.

WeChat QR code

Scan the QR code with your phone to contact us.