Freya Yang
+86 18318948097
+852 62667476
49 Inch FHD ADS Outdoor Display Module for Transit Hubs
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS490ENT-ND50
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Bezel Opening
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Input Voltage (V)
Control Type
Weight (g)
Operating Environment
Motherboard Type
Designed For
49 Inch FHD ADS Outdoor Display Module for Transit Hubs
This 49-inch high-brightness LCD module combines a 1920 × 1080 ADS panel, 51-pin LVDS input and wide viewing for public-information and advertising systems.
Product Summary
The FHD ADS Outdoor Display Module is a 49-inch component platform for transit information, retail advertising and public-facing signage that must remain legible under strong ambient light. It provides a native 1920 × 1080 RGB image, a 1073.78 × 604 mm active area and an ADS normally black transmissive structure with four-way 89° viewing.
The ND50 configuration is intended to be fixed at 5000 cd/m² in the approved production specification. A 1200:1 typical contrast ratio, 1% haze anti-glare surface and 16.7M-color output support clear schedules, promotional graphics and service information. This is a bare LCD module rather than a finished outdoor monitor, so the controller, protective front, environmental sealing, power system and thermal path require separate qualification.
Key Specifications
| Parameter | Value |
|---|---|
| Display size | 49 inches |
| Native resolution | 1920 × 1080 pixels, FHD |
| Pixel arrangement | RGB vertical stripe, 45 PPI |
| Active area | 1073.78 × 604 mm |
| Viewable area | 1078.6 × 609.5 mm |
| Display mode | ADS, normally black, transmissive |
| ND50 luminance target | 5000 cd/m² |
| Contrast ratio | 1200:1 typical |
| Viewing angles | 89°/89°/89°/89°, left/right/up/down |
| Surface treatment | Anti-glare, 1% haze |
| Response time | 8 ms typical, Tr+Td |
| Display colors | 16.7M colors, 68% NTSC |
| Standard frame rate | 60 Hz |
| Signal interface | 51-pin LVDS, two-channel, 8-bit |
| Panel supply | 12.0 V typical |
| Backlight | WLED with LED driver |
| Specified backlight life | 15,000 hours |
| Maximum panel weight | 9.8 kg |
These values define the panel-level starting point for controller, optical and cabinet qualification.
FHD Content and 5000 cd/m² Optical Planning
Prepare Native 1920 × 1080 Content
Create route maps, timetables, promotional layouts and operational messages for the native 1920 × 1080 canvas. The 45 PPI format is suitable for content viewed at public-display distances, but small text, thin lines and dense tables should still be evaluated on a production-intent sample.
Controller timing and artwork should match the exact ordered FHD resolution; optional family variants do not change this module’s native matrix.
Validate the Finished Optical Stack
A 5000 cd/m² panel provides a strong starting point for direct-light and window-facing systems, but finished readability depends on front-glass transmission, reflections, air gaps or optical bonding, mounting angle and site illumination. Measure apparent contrast with the actual protective front instead of approving the system from panel luminance alone.
Define night dimming separately so maximum daylight luminance is not used under low ambient light. Current high-brightness selection guidance also distinguishes panel luminance from final system performance under reflected ambient light.
FHD ADS Outdoor Display Module Integration
Qualify the 51-Pin LVDS Connection
The connector is specified as 51-pin, two-channel, 8-bit LVDS. A matching connector shell does not prove compatibility. Confirm the pin assignment, connector orientation, differential-pair mapping, pixel clock, synchronization, color mapping and required control signals before controller release.
Use a production-intent cable because routing and length can affect signal margin inside a large cabinet.
Separate Panel and Backlight Requirements
The 12.0 V value is the panel supply reference, not a complete finished-display power specification. Obtain the approved current demand and WLED driver requirements, including enable, dimming and protection behavior, before selecting the system power supply.
The backlight is specified with an LED driver and a 15,000-hour life. Do not replace that grade with a longer family or customization value unless the ordered backlight assembly is documented accordingly.
Motion, Viewing and Environmental Boundaries
Treat 60 Hz as the Standard Mode
The standard frame rate is 60 Hz. Other statements describe MEMC-assisted 120 Hz operation, a separate 120 Hz panel-plus-backlight configuration and a 240 Hz mode using a 60 Hz input. These options should not be combined into a claim that every unit is a native 120 Hz or 240 Hz panel.
Confirm the ordered processing architecture when smooth scrolling, fast advertising sequences or moving route information is a project requirement.
Use Wide Viewing Without Assuming a Finished Outdoor Rating
The four-way 89° viewing specification supports installations where passengers or shoppers approach from different positions. ADS normally black operation and the anti-glare surface also help maintain usable contrast across broad viewing positions.
The panel itself does not establish an IP rating, impact grade or weatherproof construction. Outdoor deployment requires a separately qualified enclosure, front protection, sealing and thermal design.
Mechanical Integration for Transit and Signage Cabinets
The active and viewable areas support front-window alignment but do not replace a complete outline, mounting and connector-location drawing.
The cabinet must support the 9.8 kg maximum load without twisting the display and preserve cable and thermal clearance.
Operating and storage limits must be fixed in the purchase specification because current product materials present conflicting temperature values. Environmental validation should use the approved model-specific document rather than a family-level assumption.
Application Fit and Selection Boundaries
The FHD ADS Outdoor Display Module is suited to passenger-information boards, station advertising, shopping-center signage, public service displays and other high-ambient-light systems that use a 49-inch FHD canvas.
The module is non-touch. Interactive use and HDMI, DisplayPort, USB, network or media-player functions require separately engineered touch and controller hardware. The manufacturer’s broader application architecture includes transit, retail, window displays and smart-city wayfinding, but those finished-system functions should not be mapped automatically to the bare panel.
Configuration and Customization
Engineering review can cover the exact luminance version, controller and LVDS cable matching, cover glass, anti-reflective treatment, optical bonding, touch integration, backlight control, enclosure structure, thermal design and mounting.
Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability and the requested specification. Sample and standard-module quantities are confirmed separately.
Procurement Checklist
Confirm the following before sample or production approval:
- Exact HS490ENT-ND50 / RS490ENT-ND50 production specification
- Native 1920 × 1080 timing and 60 Hz standard mode
- Fixed 5000 cd/m² ND50 luminance requirement
- Complete 51-pin LVDS assignment and connector orientation
- Two-channel, 8-bit LVDS timing and color mapping
- 12.0 V panel supply and current demand
- WLED voltage, current, enable and dimming requirements
- 1073.78 × 604 mm active-area alignment
- 1078.6 × 609.5 mm viewable-area alignment
- Complete outline, mounting and support drawing
- 9.8 kg maximum panel load
- Cover-glass transmission and reflection target
- Air-gap or optical-bonding design
- Approved operating and storage limits
- Standard non-touch or engineered touch configuration
- Sample criteria, quantity and annual demand
FAQ
About 49 Inch FHD ADS Outdoor Display Module
What must be checked before connecting a 51-pin LVDS controller?
Is the 5000 cd/m² configuration automatically readable through any front glass?
Do the 120 Hz and 240 Hz statements mean every module has a native high-refresh panel?
Which dimensions are required before releasing the signage cabinet?
Can the module be used as an interactive outdoor kiosk without additional components?
Freya Yang
+86 18318948097
