Freya Yang
+86 18318948097
+852 62667476
75 Inch Waterproof Digital Signage Monitor for Transit Hubs
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS750ENT-GD40
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Bezel Opening
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Input Voltage (V)
Control Type
Weight (g)
Operating Environment
Designed For
75 Inch Waterproof Digital Signage Monitor for Transit Hubs
This Waterproof Digital Signage Monitor combines 4K UHD imaging, selectable 2500–5000 cd/m² luminance and eight-lane V-by-One integration for large outdoor networks.
Product Summary
The Waterproof Digital Signage Monitor is a large-format display platform for transportation hubs, public spaces, shopping centres and outdoor advertising networks. Its 75-inch 4K screen provides the visual area required for passenger information, promotional media, public notices and long-distance wayfinding.
The configuration combines 3840 × 2160 resolution, an RGBW pixel structure, full-angle viewing and selectable high-brightness versions. The product is positioned as a sealed outdoor-display system, but the exact enclosure grade, ordered brightness and system-control architecture must be established for each project.
Key Specifications
| Parameter | Value |
|---|---|
| Display size | 75 inches |
| Native resolution | 3840 × 2160 pixels |
| Pixel format | RGBW vertical stripe, 59 PPI |
| Active area | 1649.66 × 927.936 mm |
| Opening size | 1651.6 × 930 mm |
| Brightness configurations | 2500–5000 cd/m² |
| Contrast | 1200:1 typical |
| Viewing angle | 89°/89°/89°/89° L/R/U/D |
| Surface | Anti-glare, 3% haze, 2H |
| Colors | 1.07 billion, 69% NTSC |
| Response | 8 ms typical G-to-G |
| Standard refresh | 60 Hz |
| Signal interface | 56-pin, eight-lane V-by-One |
| Driving voltage | 12.0 V typical |
| Backlight | WLED with LED driver |
| Listed backlight life | 50,000 hours |
| Touch | Non-touch |
| Panel weight | 27.6 kg typical / 30.5 kg maximum |
4K Visibility for Large Outdoor Installations
Selecting the 2500–5000 cd/m² Version
The brightness specification is a configurable range. A project does not operate at 2500 and 5000 cd/m² simultaneously; the ordered backlight and thermal configuration determine the applicable output.
A 2500 cd/m² version may suit controlled outdoor or shaded public installations, while higher-output versions can be evaluated for stronger ambient light. Final selection should account for site orientation, solar exposure, viewing distance, content contrast, cover-glass reflection and the enclosure’s heat-rejection capacity.
The 2500–5000 cd/m² range represents selectable product configurations rather than a guaranteed continuously adjustable output.
Anti-Glare Surface and Full-Angle Viewing
The panel uses an anti-glare surface with 3% haze and 2H hard coating. This helps control reflection at the LCD surface, while the confirmed 89°/89°/89°/89° viewing specification supports visibility from different pedestrian paths.
Outdoor readability still depends on the complete optical stack. Protective glass, coatings, air gaps, surface contamination and installation angle can change perceived contrast even when the panel has high luminance.
Outdoor Protection and Environmental Qualification
Confirming the IP65 or IP66 Enclosure
The product family is described with IP65/IP66 sealed protection. These grades must not be treated as interchangeable or assumed for every ordered configuration.
IP protection applies to the complete enclosure, cable entries, vents, doors, seals and installed connectors—not only the front frame.
Procurement should request the exact enclosure grade, test scope and approved construction for the ordered unit. Comparable commercial outdoor-signage products also specify enclosure protection at the complete-system level rather than deriving it from panel brightness.
Temperature and Continuous-Operation Planning
Current product materials show broad operating and storage ranges, but an older version contains narrower figures. The approved model specification must resolve this difference before environmental qualification.
Long daily duty cycles also require review of solar loading, internal heat generation, ventilation or cooling strategy, backlight output and component derating. A 50,000-hour backlight statement is a listed lifetime reference, not proof that every installation will reach that duration under every brightness and temperature combination.
Engineering the Waterproof Digital Signage Monitor
Eight-Lane 56-Pin V-by-One Integration
The native signal interface is eight-lane V-by-One through a 56-pin terminal. This is not the same as confirming direct HDMI, DisplayPort or media-player compatibility.
A matching 56-pin connector does not prove V-by-One timing, lane mapping, voltage or pin compatibility.
Engineering review must confirm:
- Native 3840 × 2160 timing
- Pixel clock and frame rate
- Eight-lane allocation
- Complete 56-pin definition
- Connector orientation
- RGBW content and scaling behavior
- 12.0 V input requirements
- Backlight driver and dimming control
- Cable type and permissible length
- Controller-board inclusion
Standard 60 Hz and MEMC-Related Modes
The standard operating frequency is 60 Hz. Additional 120 Hz and 240 Hz descriptions refer to different panel, backlight or MEMC arrangements and require configuration-specific confirmation.
MEMC-related 120/240 Hz wording does not establish native 120 Hz or 240 Hz panel refresh.
A project requiring high-frame-rate content should obtain the exact panel version, controller architecture, input frame rate and final displayed frame behavior before sample approval.
Mechanical and Mounting Review
The active image area measures 1649.66 × 927.936 mm, while the listed opening is 1651.6 × 930 mm. These measurements support content alignment and initial front-opening planning, but they are not complete enclosure dimensions.
The panel weight is 27.6 kg typical and 30.5 kg maximum. The complete product weight may be substantially different after the waterproof enclosure, glass, controller, cooling hardware and mounting structure are included.
Structural approval therefore requires:
- Complete enclosure drawing
- System weight and centre of gravity
- Mounting-hole pattern
- Portrait or landscape approval
- Wind-load requirement
- Service-door clearance
- Cable-entry locations
- Cooling clearances
- Support-frame calculation
Recommended Applications
This Waterproof Digital Signage Monitor can be evaluated for passenger-information systems, train and metro stations, airports, public squares, shopping-centre promotions, property advertising, smart-city information points, EV charging sites, fuel-station displays and large outdoor event venues.
Applications involving vehicle impact zones, passenger safety, emergency information or unattended infrastructure require system-level approval beyond the LCD specification. Installation conditions should be evaluated against the ordered protection grade, mounting structure, visibility requirement and environmental exposure.
Customization and Configuration Review
Project evaluation may cover:
- 2500–5000 cd/m² brightness selection
- Exact IP65 or IP66 enclosure
- Front protective glass
- Anti-reflective treatment
- Optical bonding
- Separate touch overlay
- V-by-One cable and controller matching
- Enclosure material and finish
- Mounting structure
- Thermal management
- Media-player architecture
- External control and network interfaces
- Branding and packaging
Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability and the requested specification. Samples and standard-product quantities are confirmed separately.
Procurement Checklist
Confirm before approval:
- Assigned model and approved revision-controlled datasheet
- Native 3840 × 2160 timing at 60 Hz
- RGBW content and scaling plan
- Exact ordered brightness configuration
- Complete eight-lane V-by-One definition
- 56-pin assignment and connector orientation
- 12.0 V input
- Backlight voltage, current, driver and dimming
- MEMC and higher-frequency behavior
- Exact IP65 or IP66 enclosure grade
- Enclosure test report
- Complete product dimensions
- Complete product weight
- Mounting and wind-load calculations
- Protective-glass construction
- Touch or non-touch requirement
- Operating and storage temperature limits
- Enclosure cooling or ventilation path
- Sample acceptance criteria
- Quantity and annual demand
FAQ
About 75 Inch Waterproof Digital Signage Monitor
How should the 2500–5000 cd/m² brightness version be selected?
What must be confirmed before connecting a 56-pin V-by-One controller?
Does the 120/240 Hz wording mean that every unit has a native high-refresh panel?
What must be checked before approving an IP65 or IP66 installation?
Is touch included in the standard configuration?
Freya Yang
+86 18318948097
