27 Inch Professional 4K Display Module for Workstations

27 Inch Professional 4K Display Module for Workstations

A 27-inch IPS UHD panel with four-lane eDP and panel-level flexibility for custom workstation monitor assemblies.

Product Summary

The Professional 4K Display Module combines a 27-inch viewing area with 3840 × 2160 resolution, IPS normally black operation, and a 30-pin four-lane eDP interface. It is designed for desktop PC and workstation monitor integration where an OEM needs the panel core rather than a finished consumer monitor. The 596.736 × 335.664 mm active area supports detailed software interfaces, image review, and multi-window workflows, while the non-touch architecture leaves the front structure open for project-specific enclosure, glass, and controller decisions.

A 30-pin eDP connector does not guarantee host compatibility without verified timing, lane rate, voltage, pin mapping, and power requirements.

Key Specifications at a Glance

4K Image Area for Workstation Interfaces

Native 3840 × 2160 Content Planning

The native raster supports crisp text, fine controls, detailed inspection images, and multiple application windows in a standard 27-inch format. The host should generate the approved timing and scaling strategy so text and line graphics remain clear. Product teams should confirm operating-system scaling, application layout, GPU capability, and controller-board output before the interface is released.

The RGB vertical-stripe panel supports 1.07 billion colors through 8-bit + A-FRC and identifies 100% sRGB coverage. Finished-system color behavior still depends on calibration, controller processing, front materials, and the selected operating profile.

IPS Viewing and Contrast Behavior

IPS normally black operation supports wide-angle viewing for desks, control rooms, and shared professional work areas. The raw viewing-angle sequence is 89/89/89/89° typical at CR ≥ 10; its directional order should be confirmed before installation orientation is fixed. The 1000:1 typical contrast ratio supports general workstation interfaces but does not establish HDR performance or application-specific color certification.

Integrating the Professional 4K Display Module

30-Pin Four-Lane eDP Qualification

Engineering approval should cover the connector part number, pin assignment, contact orientation, lane configuration, supported link rate, AUX behavior, panel power, backlight control, and timing. A matching pin count is insufficient because eDP panels can use different electrical definitions and connector orientations.

The controller path must support 3840 × 2160 at 60 Hz and the panel’s color configuration. Cable impedance, length, shielding, grounding, and retention should be reviewed with the final controller layout and enclosure.

External HDMI and DisplayPort Inputs

The panel is not a finished monitor with direct external video ports. HDMI, full-size DisplayPort, USB-C video, or other user-facing inputs require a matched controller board that converts the external signal into the approved eDP timing and power architecture. Controller-board images or connector labels do not prove that a particular board is included or compatible.

This component suits OEM projects that want control over external I/O, power input, audio, keypad controls, firmware, and enclosure design. The controller, cable set, power system, and backlight behavior must be qualified as one assembly.

Mechanical and Optical Integration

Active Area, Outline, and Bezel Planning

The 596.736 × 335.664 mm active area controls the visible window. The 608.8 × 355.3 × 13.4 mm outline controls internal clearance, support structure, cable routing, and rear-component space. The approved drawing should also define mounting features, connector location, tolerances, and keep-out zones before tooling release.

Anti-Glare Surface and 350-Nit Use Boundary

The anti-glare surface uses 25% haze and a 3H hard coating to reduce reflections in controlled environments. The 350 cd/m² typical luminance aligns with indoor workstations, desktop monitors, and commercial equipment under managed lighting.

This 350-nit panel is intended for indoor or controlled-light workstation equipment, not as proof of direct-sun readability.

Front glass, bonding materials, privacy filters, and anti-reflective treatments can change luminance, contrast, and perceived sharpness. Test the intended front stack under actual ambient lighting.

Backlight, Refresh, and Environmental Limits

The WLED backlight is identified with an LED driver and a listed 10,000-hour life. The lifetime grade and reference conditions should be confirmed before service-life calculations. Backlight voltage, current, dimming method, and thermal limits require approved electrical documentation.

A 60 Hz refresh rate and 25 ms typical response-time value position the module for professional interfaces, static graphics, office applications, and image review rather than high-refresh gaming. The operating range is 0°C to +50°C, with storage from −20°C to +60°C. Finished equipment must remain within these limits after enclosure heating and controller-board losses are considered.

Recommended OEM Applications

The Professional 4K Display Module is a practical panel core for custom workstation monitors, desktop PC displays, engineering visualization terminals, process-monitoring consoles, professional image-review equipment, and large-format software interfaces.

It should not be presented as a certified medical display, an outdoor display, a waterproof monitor, or a sunlight-readable system without separate qualification. Those outcomes depend on the complete optical stack, enclosure, electronics, compliance testing, and operating environment.

Customization and Project Qualification

The standard configuration is non-touch. Touch integration, cover glass, bonding, surface treatment, cable definition, controller board, enclosure adaptation, mounting support, branding, and packaging can be evaluated by project.

The standard configuration is non-touch, so any touch overlay requires a separate mechanical, optical, and interface design.

Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability, and the requested specification. Sample and standard-module quantities are confirmed separately.

Procurement Checklist

Confirm these items before sample approval or purchase release:

• Native 3840 × 2160 timing and 60 Hz controller output
• eDP revision, four-lane configuration, link rate, AUX support, and complete 30-pin assignment
• Connector part number, contact side, cable orientation, shielding, and retention
• Panel power, backlight voltage/current, driver method, dimming, and sequencing
• Active area, module outline, front opening, mounting structure, and keep-out zones
• Optical target after cover glass or bonding
• Anti-glare, 25% haze, and 3H surface requirements
• Non-touch standard status or separate touch requirements
• Operating and storage temperature limits
• Sample quantity, annual demand, compliance documents, and approval schedule