15.6″ Treadmill Uses Capacitance Touch LCD Display Base Panel

15.6" Treadmill Uses Capacitance Touch LCD Display Base Panel

This 15.6-inch Full HD IPS TFT-LCD is a slim display component for treadmill consoles and other embedded equipment that need a 1920 × 1080 workspace with a 30-pin eDP connection. For buyers searching for a 15.6" Treadmill Uses Capacitance Touch LCD Display, the configuration boundary is important: the standard panel is non-touch, while capacitive-touch integration can be evaluated as a separate project configuration.

Product Summary

The module combines a 15.6-inch diagonal, 16:9 Full HD format, IPS viewing structure and 400 cd/m² typical luminance. Its 344.16 × 193.59 mm active area provides room for workout data, media content, status indicators and other console graphics.

Full HD Workspace for Fitness Consoles

Native 1920 × 1080 resolution supports detailed interface layouts and video-oriented content. The 0.17925 × 0.17925 mm pixel pitch provides a fine pixel structure for text, icons, graphs and image content used in training dashboards or embedded computer interfaces.

IPS Viewing for Moving Users

The IPS structure supports a confirmed 85°/85°/85°/85° viewing specification in the left, right, up and down directions. This is useful on treadmill consoles because the user's eye position changes with height, posture and movement.

The panel is transmissive and supports 16.7M colors for graphical interfaces that benefit from wide viewing consistency.

Key Specifications

400 cd/m² for Indoor Treadmill Console Design

The 400 cd/m² typical luminance is suited to indoor and controlled-light equipment rather than direct-sun use. In a treadmill console, the final visible result also depends on the front cover, bonding structure, reflections and any touch layer added above the LCD.

Brightness Behind a Cover Lens

If a capacitive touch sensor and cover lens are added, optical transmission and reflections can change the finished appearance. Approve the complete front stack rather than treating bare-panel luminance as the final system value.

This panel should not be described as sunlight readable without separate finished-system optical validation.

Treadmill Uses Capacitance Touch LCD Display Integration

The Treadmill Uses Capacitance Touch LCD Display search intent matches treadmill projects that need Full HD visuals plus interactive input, but the standard module itself is supplied without touch. The LCD and optional touch system should therefore be qualified separately.

Standard Non-Touch Panel and Optional Capacitive Touch

The base configuration is non-touch. For treadmill projects that require capacitive input, a separate touch stack can be considered with its own cover glass, controller, interface, bonding structure and combined mechanical drawing.

Touch point count, controller part number, touch interface, cover-glass thickness and finished touch outline are not defined by the base LCD specification and must be confirmed for the ordered configuration.

eDP Display Signal and Touch Control Are Separate Requirements

The LCD image path is a 30-pin eDP connection. The optional touch-control path is not defined by the base panel data, so touch communication should not be assumed to run through the eDP connector.

Engineering approval should cover the eDP pin definition, host capability, connector orientation and cable, while the touch proposal separately defines its controller and communication interface.

Mechanical Fit for a 15.6-Inch Console

The detailed module outline is 350.66 × 216.25 × 3.00 mm. A rounded catalog table also presents approximately 350 × 216 mm with 3 mm maximum thickness. Use the higher-precision values for preliminary planning and the approved production drawing for tooling.

Active Area Versus Module Outline

The 344.16 × 193.59 mm active area defines the image region; the complete 350.66 × 216.25 × 3.00 mm outline defines LCD clearance. A treadmill bezel and any touch-cover assembly should therefore be designed from the approved mechanical drawing, not the active area alone.

Temperature and Equipment Environment

The module operates from 0°C to +50°C and stores from −20°C to +60°C. These limits fit many indoor fitness, embedded-computer and industrial-console installations when internal equipment temperature remains within range.

The temperature limits do not establish moisture resistance, sweat resistance, cleaning-chemical compatibility or enclosure ingress protection. Those requirements belong to the finished console design.

Application Fit

Treadmill and Fitness Equipment

A 15.6-inch Full HD screen provides space for speed, incline, distance, workout programs, media panes and system menus. For a 15.6" Treadmill Uses Capacitance Touch LCD Display project, the LCD can serve as the visual base while a separately qualified capacitive-touch assembly provides interactive input.

Embedded Computers and Industrial Interfaces

The 1920 × 1080 resolution, 30-pin eDP connection and 3.00 mm detailed profile also suit embedded computers, operator terminals and indoor industrial interfaces. Compatibility depends on eDP timing, electrical levels, link configuration, pin assignment and cable details rather than connector count alone.

Medical-Equipment Display Integration

The panel can be evaluated as a display component in medical-equipment interfaces where the optical, mechanical and environmental requirements match. Application wording does not establish medical certification or suitability for a particular clinical function.

Configuration and Customization

Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability and the requested specification. Sample and standard-module quantities are confirmed separately.

Project evaluation can cover capacitive-touch integration, cover-lens geometry, bonding structure, eDP cable definition, mechanical adaptation and surface-treatment requirements. Any touch configuration should be documented separately from the standard non-touch LCD.

Procurement Checklist

Confirm the module revision, native 1920 × 1080 timing, complete 30-pin eDP definition, host capability, connector orientation and cable before sample approval.

Confirm 400 cd/m² typical luminance, 800:1 typical contrast, 85°/85°/85°/85° L/R/U/D viewing, 16.7M colors, 344.16 × 193.59 mm active area, 350.66 × 216.25 × 3.00 mm outline, 0°C to +50°C operation and −20°C to +60°C storage.

If capacitive touch is required, also submit the desired cover-lens outline, touch-interface requirement, bonding method, bezel opening, sample quantity and annual demand.