Freya Yang
+86 18318948097
+852 62667476
10.1 Inch LCD Panel for Bright Ambient Light in Outdoor HMI
Model P/N
Size
Resolution
Brightness
Viewing Angle
Connector Type
Operating Temp
Overall(mm)
huisoar
HS101ENT-GE15
Brand
Panel Size (inch)
Model P/N
Resolution
Brightness (nits)
Viewing Angle
Contrast Ratio
Response Time
Overall (mm)
Active Area (mm)
Refresh Rate
Display Colors
Panel Type
Connector Type
Surface Treatment
Operating Temp
Touchscreen Type
Storage Temp
Work Mode
Pixel Format
Input Voltage (V)
Touch Interface
Control Type
Weight (g)
Operating Environment
Designed For
10.1 Inch LCD Panel for Bright Ambient Light in Outdoor HMI
Built for compact high-ambient-light equipment, this 10.1-inch WXGA module combines 40-pin LVDS with a wide operating-temperature range.
Product Summary
The LCD Panel for Bright Ambient Light is a 10.1-inch TFT-LCD component for outdoor-facing HMI equipment, vending-machine interfaces and industrial devices that need stronger visibility than an ordinary indoor panel. Its 1280 × 800 WXGA raster supports compact control layouts, status graphics, guidance prompts and equipment menus without moving to a larger display format.
The selected model uses a 1500 cd/m² luminance specification, a 216.96 × 135.6 mm active area and a compact 230.7 × 152.55 × 7 mm outline. It is a component panel rather than a sealed finished display, so host compatibility, backlight requirements, front-lens design and environmental protection must be evaluated at system level.
Key Specifications
| Parameter | Value |
|---|---|
| Display size | 10.1 inches |
| Resolution | 1280 × 800 pixels, WXGA |
| Pixel density | 149 PPI |
| Selected-model luminance | 1500 cd/m² |
| Active area | 216.96 × 135.6 mm |
| Overall dimensions | 230.7 × 152.55 × 7 mm |
| Contrast ratio | 800:1 |
| Viewing-angle data | 85/85/85/85° typical, CR ≥ 10 |
| Response time | 14/11 ms typical, Tr/Td |
| Refresh rate | 60 Hz |
| Native interface | 40-pin LVDS, one channel, 6-bit or 8-bit |
| Panel input | 3.3 V typical |
| Color support | 262K / 16.2M listed |
| Surface | Anti-glare, 3H hard coating |
| Operating temperature | −20°C to +70°C |
| Storage temperature | −30°C to +80°C |
| Touch | Optional, separately specified |
The ordered module’s exact color and LVDS bit-depth configuration should be stated in the approved specification rather than inferred from the connector alone.
WXGA Interface Planning for Compact Equipment
Drive the Native 1280 × 800 Raster
The host should output the native 1280 × 800 timing at 60 Hz. Native operation preserves text edges, icon proportions and interface spacing without the softness or geometric distortion introduced by scaling.
The 16:10 workspace is suitable for industrial status pages, equipment menus and operational prompts. UI assets should be prepared for the actual 10.1-inch viewing distance and final enclosure opening.
Confirm the Ordered Color Configuration
The technical data identifies both 262K and 16.2M color configurations together with one-channel 6-bit or 8-bit LVDS. These values should not be treated as interchangeable without an approved configuration sheet.
The controller, cable and panel must use the same channel mapping and bit depth. A mismatch can produce incorrect colors, unstable images or no usable display output.
1500 cd/m² Optical Performance
Test the Complete Front Optical Stack
The 1500 cd/m² model provides a strong luminance starting point for high-ambient-light installations, but panel luminance alone does not approve a finished product for direct-sun use.
The final cover lens, air gap or bonding layer, ambient reflections and enclosure angle determine practical readability.
Sample validation should use the intended front structure and installation lighting. A transparent cover with high reflectance can reduce effective contrast even when the panel itself has high luminance.
Use the Anti-Glare Surface in the Final Design
The panel has an anti-glare surface with 3H hard coating. This can reduce distracting reflections compared with a glare finish, but the benefit can be weakened by a highly reflective protective lens.
Anti-glare, anti-reflective treatment and optical bonding should be reviewed as a complete system. The 800:1 contrast ratio and raw 85/85/85/85° viewing sequence should also be checked in the final mounting orientation.
LVDS Integration for the LCD Panel for Bright Ambient Light
A 40-Pin Connector Does Not Prove Compatibility
The module uses one-channel LVDS through a 40-pin connector.
A matching 40-pin connector does not prove timing, voltage, channel, bit-depth or pin compatibility.
Before sample connection, verify the native timing, pixel clock, synchronization, complete pin assignment, connector orientation and 3.3 V panel rail. A 40-pin MIPI or eDP panel is not electrically interchangeable with this LVDS configuration.
Verify the 6-Bit or 8-Bit Configuration
The technical data permits a 6-bit or 8-bit signal path. The ordered version must match the host output and cable definition.
Do not assume that the higher color figure automatically identifies the supplied bit depth. The approved model specification should state the LVDS mapping, color configuration and panel timing together.
Mechanical and Temperature Qualification
Design Around the Active and Overall Dimensions
The visible image area is 216.96 × 135.6 mm. The complete panel measures 230.7 × 152.55 × 7 mm.
The front opening should be planned from the approved drawing rather than from the active area alone. Internal design must also provide connector access, cable bend radius, rear clearance and mounting tolerance.
The 7 mm depth is useful for compact equipment, but it does not include a front cover, touchscreen, controller board or outdoor enclosure.
Validate the Wide-Temperature Requirement
The operating range is −20°C to +70°C, with storage from −30°C to +80°C. These limits support broader environmental planning than a standard indoor commercial panel.
They do not replace finished-system thermal testing. Backlight heat, sealed-enclosure temperature rise, solar loading, airflow and controller-board dissipation can all change the actual internal temperature.
Application Fit
The LCD Panel for Bright Ambient Light is suitable for outdoor-facing HMI panels, vending-machine interfaces, compact service terminals, industrial control equipment and sheltered public information systems.
It is especially relevant when a standard indoor display lacks sufficient luminance but the product still needs a compact 10.1-inch footprint. The panel itself is not a waterproof finished display; any outdoor installation requires a qualified enclosure, protective front structure, thermal design and ingress-protection strategy.
Configuration and Procurement
Touch technology is optional and should be treated as a separate assembly requirement. The touchscreen type, controller, electrical interface, cover glass, bonding method and combined mechanical outline must be defined for the ordered version.
Project review can also cover:
- Brightness selection
- LVDS cable and controller matching
- Backlight design
- Cover glass
- Anti-glare or anti-reflective treatment
- Optical bonding
- Enclosure adaptation
- Mounting
- Thermal evaluation
- Branding and packaging
Custom configurations are generally reviewed from 500 pieces, subject to tooling requirements, material availability and the requested specification. Sample and standard-module quantities are confirmed separately.
Procurement Checklist
Confirm these items before sample approval:
- Exact
RS101ENT-GE15model reference - Approved model-specific datasheet
- Approved mechanical drawing
- 1500 cd/m² ordered luminance
- Native 1280 × 800 timing at 60 Hz
- One-channel LVDS support
- Exact 6-bit or 8-bit configuration
- Complete 40-pin assignment
- Connector pitch, contact side and orientation
- 3.3 V panel input
- Backlight voltage, current, enable and dimming requirements
- 216.96 × 135.6 mm active area
- 230.7 × 152.55 × 7 mm overall dimensions
- Front-lens material and reflectance
- Air-gap or optical-bonding plan
- Touch technology and touch interface, when required
- −20°C to +70°C operating requirement
- −30°C to +80°C storage requirement
- Enclosure sealing and thermal path
- Sample quantity and annual demand
FAQ
About 10.1 Inch LCD Panel for Bright Ambient Light
What must be checked before connecting a 40-pin LVDS controller?
Does 1500 cd/m² guarantee finished-system sunlight readability?
How should the 6-bit or 8-bit LVDS configuration be confirmed?
Is a touchscreen included with the standard panel?
Which dimensions control enclosure release?
Freya Yang
+86 18318948097
